Hi Guys,
Can anyone help me configure SXT with P2Mp.
Its a only 2 client setup for an internetline which is arriving 100 meters away from home.
I’ve bought 3 SXT G-5HPnD-SA
the first one:
- got an automatic ip from isp on eth1 and the wlan2 got 192.168.0.254
- set the wireless mode to ap and 5 GHz only N
- configured nat and dhcp server
the second and third one:
- wireless mode set to station bridge and configured a bridge on eth and wlan ip through dhcp from first.
Connection so far is great it shows on the first client a tx/rx status: 54mb/144mb
on the second one 54/54…
so everything should be fine … but nothing at all
download speed is at the cable modem connected through lan 100mb/s down- and 4mb/s upload
if I do a speed test at the first and second client I get a download speed of 36 mb/s - 40 mb/s and a upload speed of about 0,5mb/s
So my question is is there a tutorial out there or better a step by step setu for such a p2mp connetion with sxt’s or same routermodels.
thanks for reading !!!
any help would be great …
Steve 