SXT LTE CELLID PROBLEM

RouterOS Wireless Networking
1

Hi,

i have SXT LTE and have two different Cells:

First cell place around 7km (-79db) [CellID 1]
Second cell place around 9km (-80db) [CellId 3]

When SXT connects to CellID 1 - it work perfect and stable, but sometime SXT switched to CellId 3, because rx level same. But CellID 3 not work, because it blocked by distance.

So, i have problem: sometimes i have not internet, when SXT jump to cellid 3. I need reset SXT and wait when it switches to cellid 1.

Question: How keep CellId? I need only CellId 1.

2

Haven’t had the chance to touch an SXT-LTE, but a possible way may be using Wireless > connect-list, alowing one cell and disallowing anything else, see http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#Restrict_station_connections_only_to_specific_access_points

3

Thank you for reply, but connect list not allow to add lte interface…

4

What does it allow?

5

nothing, because it for wifi, but SXT LTE haven’t.

6

Hello, can you send supout.rif to support@mikrotik.com

7

maybe the orientation/location of the device to improve cellid1 signal and/or worsen cell id3 signal

8

If i change orientation not directly to cell, i lost Upload speed.
Is only one can be solve it - Cell Lock function in Device.
Now i use parabolic dish with SXTLTE and it work.