SXT LTE Connection

I am trying to connect the LTE interface of a https://mikrotik.com/product/sxt_lte_kit

The SIM that I am testing is Vodafone ES, and it is placed in SIM-A. In system-> routerboard-> SIM I have selected the slot of the SIM correctly

I think I may be putting the Vodafone APN wrong. I’m using:

APN: ac.vodafone.es
user: vodafone
pass: vodafone

I have also tried APN airtelnet.es without success.

the registration status after a while is denied:

interface lte info lte1
pin-status: no password required
functionality: full
registration-status: denied
manufacturer: MikroTik
model: R11e-4G
Review: R11e-4G_V005

and the LTE Scanner does not return any results.

I have updated the firmware and started from the factory settings to start testing. Also adding only the APN to that initial configuration. In any post that I find seems to work without having to configure too much.
I can not think what else to try. I have also tried with 3 different SIM cards, but all of Vodafone ES (previously I have removed the PIN)

Any suggestions?
Thank you

Hi,
Any news… I have a similar issue. I try to use a SIM of Vodafone DE (Germany, UltraCard) but I have no idea way I cannot connect to a Cell. With a Card of O2 it works…

Thanks

In the UK you also need to set authentication to PAP on Vodafone.

Hi,
I believe I really tried all combinations of APN and authentication I found somewhere…

APNs: web.vodafone.de, home.vodafone.de, event.vodafone.de
Authentication PAP: vf/vf, “blank”/“blank”, vodafone/vodafone, web/web
Authentication PAP: vf/vf, “blank”/“blank”, vodafone/vodafone, web/web


What I am wondering. Should I get something in the LTE scan or seeing some LEDs on even I am not connected to a Cell? I can see my cell phone having a good service but maybe the SXT does not have any…

Edit1:
I play a little bit with the position of the device and it looks like I get a connection to a cell

At least that is what I believe …

00:26:38 lte,async,raw lte1: sent AT%MEAS="7" 
00:26:38 lte,async,raw lte1: rcvd CQI: 0 
00:26:38 lte,async,raw lte1: sent AT%MEAS="8" 
00:26:38 lte,async,raw lte1: rcvd Signal Quality: RSRP = -97, RSRQ = -11, SINR = 22, RSSI = -78 
00:26:38 lte,async,raw lte1: sent AT%PCONI 
00:26:38 lte,async,raw lte1: rcvd duplexing mode: FDD 
00:26:38 lte,async,raw lte1: rcvd Transmission mode: Tx diversity 
00:26:38 lte,async,raw lte1: rcvd Bandwidth: 5 
00:26:38 lte,async,raw lte1: rcvd EARFCN: 1300 
00:26:38 lte,async,raw lte1: rcvd Global Cell ID: 01BA8200 
00:26:38 lte,async,raw lte1: rcvd Physical Cell ID: 210 
00:26:38 lte,async,raw lte1: rcvd HNBN: N/A 
00:26:41 lte,async,raw lte1: sent AT%MEAS="7" 
00:26:41 lte,async,raw lte1: rcvd CQI: 0 
00:26:41 lte,async,raw lte1: sent AT%MEAS="8" 
00:26:41 lte,async,raw lte1: rcvd Signal Quality: RSRP = -96, RSRQ = -10, SINR = 22, RSSI = -79 
00:26:41 lte,async,raw lte1: sent AT%PCONI 
00:26:41 lte,async,raw lte1: rcvd duplexing mode: FDD 
00:26:41 lte,async,raw lte1: rcvd Transmission mode: Tx diversity 
00:26:41 lte,async,raw lte1: rcvd Bandwidth: 5 
00:26:41 lte,async,raw lte1: rcvd EARFCN: 1300 
00:26:41 lte,async,raw lte1: rcvd Global Cell ID: 01BA8200 
00:26:41 lte,async,raw lte1: rcvd Physical Cell ID: 210 
00:26:41 lte,async,raw lte1: rcvd HNBN: N/A

Question: why can this be, if my phone is just laying on my table and is having a good service


But it looks like I still have a registration-status: denied… can this be caused by the wrong

/interface lte info lte1   

 pin-status: ok
  registration-status: denied
        functionality: full
         manufacturer: MikroTik
                model: R11e-4G
             revision: R11e-4G_V005
                 imei: 359147090015765
                 imsi: 262021408436965
    subscriber-number: ,"01721003271",129

Thanks

Josef

Hi @ @ll,

was there a solution to the questions asked before?
I just tried to connect to
home.vodafone.de (gigacube)
without success.

Kind regards

Bring us information like, ROS version, Modem model and firmware. Activate logs topic=lte,!raw and share them.