HEllo,
I have bought a Routerboard SXT LTE and I am using it in Portugal With “MEO” Provider.
I have Confirmed and my provider uses bands 3 and 7 but I can not connect or can not get any usefull information.
SXT LTE is in a location wich should have a good signal
My APN is set “internet” wich is correct
My provider does not use user or password
Simcard pin is disabled in card
bands 3 and 7 are active in configuration
When I disable band and enable them again, I can see for brief moments “Sim card invalid” (maybe its normal while its activating) and after only “PLMN search in progress”. Nothing more happens and I can not scan network.
03:55:38 lte,debug online
03:55:38 system,info device changed by admin
03:55:58 lte,async lte1: sent At%turnmode=1
03:55:58 system,info device changed by admin
03:55:58 lte,debug offline
03:55:58 lte,async lte1: rcvd OK=LTEOnly
03:55:58 lte,async lte1: sent at%bcfgw=0,0,0
03:55:58 lte,async lte1: rcvd OK
03:55:58 lte,async lte1: sent at%bcfgw=0,1,0
03:55:58 lte,async lte1: rcvd OK
03:55:58 lte,async lte1: sent at%bcfgw=0,2,0
03:55:58 lte,async lte1: rcvd OK
03:55:58 lte,async lte1: sent at%bcfgw=0,3,0
03:55:58 lte,async lte1: rcvd OK
03:55:58 lte,async lte1: sent at%bcfgw=0,2,3
03:55:58 lte,async lte1: rcvd OK
03:55:58 lte,async lte1: sent at%bcfgsv=1
03:55:58 lte,async lte1: rcvd OK
03:55:58 lte,async lte1: modem hung up
03:56:04 lte,debug online
03:56:05 lte,debug UICC activate
03:56:05 lte,debug online
03:56:13 lte,async lte1: sent At%turnmode=1
03:56:13 system,info device changed by admin
03:56:13 lte,debug offline
03:56:13 lte,async lte1: rcvd OK=LTEOnly
03:56:13 lte,async lte1: sent at%bcfgw=0,0,0
03:56:13 lte,async lte1: rcvd OK
03:56:13 lte,async lte1: sent at%bcfgw=0,1,0
03:56:13 lte,async lte1: rcvd OK
03:56:13 lte,async lte1: sent at%bcfgw=0,2,0
03:56:13 lte,async lte1: rcvd OK
03:56:13 lte,async lte1: sent at%bcfgw=0,3,0
03:56:13 lte,async lte1: rcvd OK
03:56:13 lte,async lte1: sent at%bcfgw=0,2,3
03:56:13 lte,async lte1: rcvd OK
03:56:13 lte,async lte1: sent at%bcfgw=0,3,7
03:56:13 lte,async lte1: rcvd OK
03:56:13 lte,async lte1: sent at%bcfgsv=1
03:56:13 lte,async lte1: rcvd OK
03:56:13 lte,async lte1: modem hung up
[admin@MikroTik LTE] /log> /interface lte info lte1 once
status: PLMN search in progress
revision: chip:2.0 fw:0.1.2.3
imei: 3561590602xxxxx
imsi: 2680696253xxxxx
uicc: 1528316096149115xxxxxx
Am I doing something wrong??? What is the problem???