I READ all info here.
in sxt.rsc file:
/ip dns set allow-remote-requests=yes servers=4.4.4.4
Please not use this. Better way is provide users the DNS with DHCP Networks setting.
And DNS 4.4.4.4 not work - maybe you miss with google 8.8.4.4 and 8.8.8.8.
.
/ip dhcp-server network
add address=192.168.1.0/24 dns-server=4.4.4.4,8.8.8.8 gateway=192.168.1.1
maybe 8.8.4.4 and 8.8.8.8
.
I not check Firewall* and Schedulers* and Script*.
Next time please use windows cmd: find /v “CHR_VPN” log.txt > new_log.txt because all this lines with VPN are so frustrate (grep -v).
Please write in logs at the end note like: … <= Now drop internet | Now I do at+reset | He do at+reset himself | .. etc.
post #1
#1 | code 1 | The logs about LTE are classic.
#1 | code 2 | 1,“2dab”,“004a0702”,7 or 9 ← E-UTRAN type
#1 | code 3 | normal
Post #4
I understand your frustration.
I think case is very very similar to my post: http://forum.mikrotik.com/t/v6-46-1-stable-is-released/135478/1
Means I have ca-band but I loose it and signal is worst… and timeout… no internet… and r11e-lte6 stuck in offline by hours until other script not do stg. .
Post #5
The same log’s.
From logs you not reach any more. I read >10 at command’s differ vendors, check many at commands. I know more but still I not developer.
MikroTik install me firmware modem v22 but case is “waiting” and I send many feedback about firmware itself hope sth change.
Please contact me via Telegram (my signature) and I share you some scripts who help me and you describe other parameters, count online/offline time, monitor changes of ca-band etc. “info lte1” are the best source for scripting.