I have 1 omnitik and 5 SXT’s.
I like to config a point to Multipoint connection with separate VLAN.
i follow link bellow, i can configure a point to Multipoint. but i can’t separate VLAN
http://www.wispforum.net/entry.php?6-How-to-Connect-two-Mikrotik-SXT-5D-s-In-Bridge-Mode-Part-II&goto=prev
Please anyone can help me and share command.
Thanks for advance.
Utilize static WDS interfaces and add those interfaces into a bridge with the VLAN interface. Here’s what I do.
AP:
/interface vlan
add interface=ether1 disabled=no name=vlan10 vlan-id=10
add interface=ether1 disabled=no name=vlan11 vlan-id=11
/interface bridge
add name=bridge10 comment="VLAN 10 Bridge"
add name=bridge11 comment="VLAN 11 Bridge"
/interface wireless
set wlan1 wds-mode=static
/interface wireless wds
add master-interface=wlan1 disabled=no name=wds1 wds-address=<Subscriber MAC>
add master-interface=wlan1 disabled=no name=wds2 wds-address=<Subscriber MAC>
/interface bride port
add bridge=bridge10 interface=vlan10
add bridge=bridge11 interface=vlan11
add bridge=bridge10 interface=wds1
add bridge=bridge11 interface=wds2
Subscriber:
/interface bridge add name=bridge1
/interface wireless
set 0 wds-mode=dynamic wds-default-bridge=bridge1
Thank you so much blake for your command.
I have 4 SXT which 3 of them connect to the same VLAN 185 and 1 SXT connect to VLAN 187.
What should i add mac address of WDS ?
.
.
.
/interface wireless wds
add master-interface=wlan1 disabled=no name=wds1 wds-address=
add master-interface=wlan1 disabled=no name=wds2 wds-address=
.
.
.
Thanks
MAC address of SXT
I still have problem with VLAN configuration on my AP and SXT
here are the copy script:
# jan/02/1970 00:27:23 by RouterOS 5.9
# software id = M3AW-V04L
#
/interface bridge
add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \
disabled=no forward-delay=15s l2mtu=1596 max-message-age=20s mtu=1500 \
name=B-185-sks priority=0x8000 protocol-mode=none transmit-hold-count=6
add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \
disabled=no forward-delay=15s l2mtu=1596 max-message-age=20s mtu=1500 \
name=B-187-mwg priority=0x8000 protocol-mode=none transmit-hold-count=6
/interface vlan
add arp=enabled disabled=no interface=ether1-gateway l2mtu=1596 mtu=1500 \
name=V-185-sks use-service-tag=no vlan-id=185
add arp=enabled disabled=no interface=ether1-gateway l2mtu=1596 mtu=1500 \
name=V-187-mwg use-service-tag=no vlan-id=187
add arp=enabled disabled=no interface=ether1-gateway l2mtu=1596 mtu=1500 \
name=V-management use-service-tag=no vlan-id=10
/interface wireless
set 0 adaptive-noise-immunity=none allow-sharedkey=no antenna-gain=0 area="" \
arp=enabled band=5ghz-onlyn basic-rates-a/g=6Mbps bridge-mode=enabled \
channel-width=20mhz compression=no country=no_country_set \
default-ap-tx-limit=0 default-authentication=yes default-client-tx-limit=\
0 default-forwarding=yes dfs-mode=none disable-running-check=no disabled=\
yes disconnect-timeout=3s distance=dynamic frame-lifetime=0 frequency=\
5180 frequency-mode=manual-txpower frequency-offset=0 hide-ssid=no \
ht-ampdu-priorities=0 ht-amsdu-limit=8192 ht-amsdu-threshold=8192 \
ht-basic-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7 \
ht-guard-interval=any ht-rxchains=0,1 ht-supported-mcs="mcs-0,mcs-1,mcs-2,\
mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-\
14,mcs-15,mcs-16,mcs-17,mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" \
ht-txchains=0,1 hw-fragmentation-threshold=disabled hw-protection-mode=\
none hw-protection-threshold=0 hw-retries=7 l2mtu=2290 mac-address=\
00:0C:42:C3:32:57 max-station-count=2007 mode=ap-bridge mtu=1500 name=\
W-OmTIK noise-floor-threshold=default nv2-cell-radius=30 \
nv2-noise-floor-offset=default nv2-preshared-key="" nv2-qos=default \
nv2-queue-count=2 nv2-security=disabled on-fail-retry-time=100ms \
periodic-calibration=default periodic-calibration-interval=60 \
preamble-mode=both proprietary-extensions=post-2.9.25 radio-name=\
000C42C33257 rate-selection=advanced rate-set=default scan-list=default \
security-profile=default ssid=SI-OTIK station-bridge-clone-mac=\
00:00:00:00:00:00 supported-rates-a/g=\
6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps tdma-period-size=2 \
tx-power-mode=default update-stats-interval=disabled wds-cost-range=\
50-150 wds-default-bridge=none wds-default-cost=100 wds-ignore-ssid=no \
wds-mode=static wireless-protocol=nv2 wmm-support=disabled
/interface wireless wds
add arp=enabled disabled=no master-interface=W-OmTIK mtu=1500 name=W-185-sks \
wds-address=00:0C:42:84:6A:08
add arp=enabled disabled=no master-interface=W-OmTIK mtu=1500 name=W-187-mwg \
wds-address=00:0C:42:84:4A:5C
/interface bridge port
add bridge=B-185-sks disabled=no edge=auto external-fdb=auto horizon=none \
interface=V-185-sks path-cost=10 point-to-point=auto priority=0x80
add bridge=B-185-sks disabled=no edge=auto external-fdb=auto horizon=none \
interface=W-185-sks path-cost=10 point-to-point=auto priority=0x80
add bridge=B-187-mwg disabled=no edge=auto external-fdb=auto horizon=none \
interface=W-187-mwg path-cost=10 point-to-point=auto priority=0x80
add bridge=B-187-mwg disabled=no edge=auto external-fdb=auto horizon=none \
interface=V-187-mwg path-cost=10 point-to-point=auto priority=0x80
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\
no
/ip address
add address=192.168.88.1/24 comment="default configuration" disabled=no \
interface=V-management network=192.168.88.0
add address=192.168.1.1/24 disabled=no interface=ether2-master-local network=\
192.168.1.0
/ip neighbor discovery
set ether1-gateway disabled=no
set ether2-master-local disabled=no
set ether3-slave-local disabled=no
set ether4-slave-local disabled=no
set ether5-slave-local disabled=no
set W-OmTIK disabled=yes
set V-185-sks disabled=yes
set V-187-mwg disabled=yes
set W-185-sks disabled=yes
set W-187-mwg disabled=yes
set B-185-sks disabled=no
set B-187-mwg disabled=no
set V-management disabled=yes
# jan/02/1970 00:17:40 by RouterOS 5.8
# software id = 1ZQ8-UUI6
#
/interface bridge
add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \
disabled=no forward-delay=15s l2mtu=65535 max-message-age=20s mtu=1500 \
name=B-SXT-02 priority=0x8000 protocol-mode=rstp transmit-hold-count=6
/interface ethernet
set 0 arp=enabled auto-negotiation=yes disabled=no full-duplex=yes l2mtu=1598 \
mac-address=00:0C:42:84:6A:08 mtu=1500 name=ether1-local speed=100Mbps
/interface wireless
set 0 adaptive-noise-immunity=none allow-sharedkey=no antenna-gain=0 area="" \
arp=enabled band=5ghz-onlyn basic-rates-a/g=6Mbps bridge-mode=enabled \
channel-width=20mhz compression=no country=no_country_set \
default-ap-tx-limit=0 default-authentication=yes default-client-tx-limit=\
0 default-forwarding=yes dfs-mode=none disable-running-check=no disabled=\
no disconnect-timeout=3s distance=dynamic frame-lifetime=0 frequency=5180 \
frequency-mode=manual-txpower frequency-offset=0 hide-ssid=no \
ht-ampdu-priorities=0 ht-amsdu-limit=8192 ht-amsdu-threshold=8192 \
ht-basic-mcs=mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7 \
ht-guard-interval=any ht-rxchains=0,1 ht-supported-mcs="mcs-0,mcs-1,mcs-2,\
mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-\
14,mcs-15,mcs-16,mcs-17,mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" \
ht-txchains=0,1 hw-fragmentation-threshold=disabled hw-protection-mode=\
none hw-protection-threshold=0 hw-retries=7 l2mtu=2290 mac-address=\
00:0C:42:84:6A:09 max-station-count=2007 mode=station-bridge mtu=1500 \
name=wlan1-gateway noise-floor-threshold=default nv2-cell-radius=30 \
nv2-noise-floor-offset=default nv2-preshared-key="" nv2-qos=default \
nv2-queue-count=2 nv2-security=disabled on-fail-retry-time=100ms \
periodic-calibration=default periodic-calibration-interval=60 \
preamble-mode=both proprietary-extensions=post-2.9.25 radio-name=\
000C42846A09 rate-selection=legacy rate-set=default scan-list=default \
security-profile=default ssid=SI-OTIK station-bridge-clone-mac=\
00:00:00:00:00:00 supported-rates-a/g=\
6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps tdma-period-size=2 \
tx-power-mode=default update-stats-interval=disabled wds-cost-range=\
50-150 wds-default-bridge=B-SXT-02 wds-default-cost=100 wds-ignore-ssid=\
no wds-mode=dynamic wireless-protocol=nv2 wmm-support=disabled
/interface bridge port
add bridge=B-SXT-02 disabled=yes edge=auto external-fdb=auto horizon=none \
interface=ether1-local path-cost=10 point-to-point=auto priority=0x80
add bridge=B-SXT-02 disabled=yes edge=auto external-fdb=auto horizon=none \
interface=wlan1-gateway path-cost=10 point-to-point=auto priority=0x80
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\
no
/ip address
add address=192.168.88.2/24 comment="default configuration" disabled=no \
interface=ether1-local network=192.168.88.0
/ip neighbor discovery
set ether1-local disabled=no
set wlan1-gateway disabled=yes
set B-SXT-02 disabled=no
Please could you check the scrip have any mistake.
Thanks for advance!