SXTsq Lite60 - I’ve assigned an IP address to ether1, but when I plug into ether1 and give myself an IP address in that range I can neither ping nor access that IP. If I load winbox up it shows the device at 10.200.100.1
What’s going on? This is about the most simple config ever.
[admin@MikroTik] > /export
jan/02/1970 00:02:07 by RouterOS 6.42.6
software id = UARC-JP66
model = RBSXTsq-60ad
serial number = A1BE091BBC89
/interface w60g
set [ find ] disabled=no mode=station-bridge name=wlan60-1
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip address
add address=10.200.100.1 interface=ether1 network=255.255.255.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=wlan60-1
/system routerboard settings
set silent-boot=no