Newbie here. How would I go about incorporating these settings into my MikroTik hEX via WinBox? I’m familiar enough with WimBox, but not with port forwarding in WinBox.
Thanks
IPv4 Address Block: 208.54.0.0/17:
Port &TCP/UDP
Description
Port: 500 / UDPIPsec - IKE : Authentication [WFC 2.0]
Port: 4500 / UDPIPsec - NAT traversal : Encrypted voice traffic [WFC 2.0]
Port: 5061 / TCP/UDPSIP/TLS : Encrypted SIP [WFC 1.0]
IPv4 Address Block: 66.94.0.0/19:
Port &TCP/UDP
Description
Port: 443 / TCPHTTPS : Used for handset authentication [WFC 1.0]
Port: 993 / TCPIMAP/SSL : Visual Voicemail [WFC 1.0]