Test racks

Here are a couple photos from one of our test racks, here we test both software and hardware. The last image shows our wireless test chamber, where we tested the 802.11ac
DSC_0797.jpg
DSC_0799.jpg
DSC_0800.jpg
DSC_0801.jpg
DSC_0802.jpg
DSC_0803.jpg
office.jpg

Very nice Normis.

Looks good!

nice

Nice playground. I have not seen any mAP or other new devices in the rack…

Yes it stands out when you know.

2 Points to MikroTik for using Velcro strips instead of zip-ties!

Yes, I know that Velcro doesn’t work for outdoor installations, but zip-ties are a royal pain when used in indoor racks, especially those installed in dark corners.

Cut MikroTik some slack. After all, they just started producing rack-mounted devices, so they’re still getting the hang of these rack standards from the distant past of tube-based radio gear and telco installations.

I assume this is the firmware update test rack…

It looks like there’s a RB850 in the rack just above the serial port server. It’s in the bottom left of this picture -

Yes, it could be. The Ethernet connectors/LEDs are reversed compared to a 450G.
So it is not a myth :laughing:

Very nice and clean!

Where can I buy those 1u cable organisers on the side of the rack? They look handy.

Is there a contest to win this ? :smiley:

They should be very common… :unamused:

You could get them even from eBay.

Nice rack :slight_smile: .



And that is the first time ever I’ve said this with it having a technical meaning, and not the other kind of meaning… :laughing:

Thanks all for your help…

As you can see my search term’s aren’t yielding any results. http://www.ebay.co.uk/sch/i.html?_odkw=1u+cable+organiser&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X1u+cable+tidy&_nkw=1u+cable+tidy&_sacat=0 What should I be searching for?

http://bit.ly/1q7WrBQ