hi my freinds
if you have 2 ominiantennas ..the distance between both is 1 meter . the both are in the same elevation on the tower..
the first is with groove 5 ghz ( 200mw) output power .the second is with xr-5( 600 mw) +routerboard 433
what is the best ?
1-the 2 omini with one frequency or with different frequencies
2- the horizontal distance is as above or else
3- the elevation is as above or else
please need the replay
need the replay please…
If I understand the question correctly, you want them vertically separated as much as possible.
Why are you running two omni on the same band so close together?
__
thank you very much
i will explain the matter
i want to expand my wireless network ..the 1st omini is to the near clients..the second is for the far clients ( above 2 kms)
the 1st is for littile number of users…the second is for large number of users
i hope you understand the idea
If you dont want to use e.g. 4x90 degree sectors I would combine a sector with
an omni. Direct the sector to the distant clients.
If you want to use 2 omnis put them above each other. If you place them at the
same hight they cry at each other.
__
If you place them at the
same hight they cry at each other. >
so i think i will put the omini+xr-5 at the 15meters elevation with 5750mhz frequency
and put the omini + groove at the 12meter elevation with 5260 mhz frequency
is that correct?
__
till now i dont see a specifice answer …are my steps above are correct ?
my great appreciation
Yes it is ok to make vertical distance, actually, it is required.
You should use different polarisation antennas. That would really help.
__
You should use different polarisation antennas >
thank you…
but my dear the ominiantenna have one direction ( vertical polarisation )
so if you have 2 omini ..the both are with vertical polarisation
i mean ..it is impossible to make omini run with horizantal polarisation
thank you again…
Well, you are correct, you cannot use vertical polarised omni as horizontal polarised.
But you can replace it with horizontaly polarised omni.
execuse me ..we are talking about omini 5 ghz not 2.4
thankssssssssssssssss
What frequency has to with antenna polarization?
It is just about antenna construction.