the groove a-5hn as a broadband router...........

RouterOS Beginner Basics
1

hi every one…
for 3 days ago and i tried to make groove a-5hn works as outdoor broadband router..lets give you an idea /
1- i succssefully established an wireless connection with ISP .
2- i set the pppoe in the groove and it worked fine.
3- i set dns,gatway,firwal,nat…etc as down
4- i successfully set the dhcp server to give the ip addresses

but the proplem is there is no internet
i will put my settings images.and ask you to help me if forgot somethings

2

Only thing that is standing out to me, would be to change the wireless mode to Station, instead of station pseudobridge.

3

An upload from /export compact would be useful.

You mentioned setting the DHCP server - did you mean client or server?

4

i did it .but still no internet

to let computers to get ip address from any mikrotik device you have to set the dhcp server .so any computer can connect to.

5

why not just use Station instead?I hope I’m not mistaking but you must use Station with NAT and pseudobridge in bridge mode when the AP is incompatible in some way.

6

my dare .there are nothing in mikrotik called as your saying(Station with NAT and pseudobridge in bridge )

7

The images above only show a fraction of the config so please upload the out from /export compact.

Any reason you are masquareding all traffic? Masquerading the output on the PPPoE interface makes sense but the first NAT rule above looks dangerous.

8

You can do this with one or two clicks, if you simply use Quickset. Open the IP of your device in a web browser, and Quickset will open. There you can choose “AP mode” and basically you are done.

9

actually .i dont understand you.how i do that??!!

do you suggest another nat firewal rule?

AP mode !!!