Hi,
what is the right /safe way how to upgrade a MT box which uses wireless-test package?
For test purposes I have upgraded about 20 RBs (RB133xx, RB411) with 3.22 to 3.23 and it worked fine (except one case - one RB didn;t booted properly). Then I upgraded 2 RB boxes (RB133C3 with 16MB RAM) from 3.20 to 3.23. Both boxes booted but there was no wireless package active. The wireless-3.23 was disabled and wireless-test-3.23 (which I uploaded together with main package) was no present. When a technician enabled the wireless-3.23 package and rebooted the box there was no wireless related config - i.e wlan1 interface was disabled and other wireless settings was reset.
In each case I uploaded the main .npk package and wireless-test package and then the box was rebooted.
So since there is no all-in-one package which contains wireless-test what is the correct way how to upgrade a box which is using wireless-test? Enable the regular wireless package->upgrade->reboot->install wireless-test=>reboot ?? The boxes are accessible only through the WiFi interface so the interface should be working in any step of the upgrade…
thanks