Dear sergejs,
I have full faith on you about MT OS related knowledge that’s why I have some questions but those are so basic that anyone could laugh at me
. But I have to clear my self, ok let me start.
-
If I mark packet in mangle with out marking connection mark what will be the problem or difference, cause I saw some mark connection and mark packet bytes are not same in a mangle marking(like http connection mark n mark packet byte) and btw it happens in ver 3. Then I make only the packet marking for http and it’s working like before I mean as with mark connection then mark packet. Can you tell me what should I do? Do I have to mark connection first then mark packet for a rule?
-
What is the difference between prerouting and postrouting chain? Like for SMTP marking what chain shoud I use? I have put forward chain for SMTP and that’s works fine and I had test with prerouting chain also and it worked also, so please help me understand about those chains (Prerouting n postrouting).
-
Please let me know what kind of chain I should use for those rules:
a. http.
b. smtp.
c. pop3.
d. icmp. and
e. p2p
It’ll be very very helpful to me if anyone explain those rules to me.
BTW I used layer 7 protocols for some rules.
Thanks n regards
H Zahid