I am being provided following configurations instructions from ISP for Video Conferencing facility. These settings are for Cisco but I have Mikrotik CCR-1036-4G Router. Please help how can I configure these settings in Mikrotik.My router configuration file is attached.
Please configure OSPF 2 , 4
Create sub-interfaces .20,.40 with encapsulation/vlan-type dot1q
Configure P2P private IPs as follows:
Gi-0/2.20
Encapsulation/vlan-type dot1q 20
Ip address 172.31.69.60/30
Gi-0/2.40
Encapsulation/vlan-type dot1q 40
Ip address 10.31.69.60/30
Create ip prefix list public for public ip pool 121.52.146.208/28 (111.68.98.208/28)
Create route-map or route policy public and call ip prefix public
Configure public ip pool 121.52.146.208/28 on lan interface e.g. gi-0/1
GENERIC SAMPLE CONFIG FOR CISCO (PLEASE DO NOT USE THESE IP ADDRESSES, YOU WILL BE PROVIDED YOUR OWN POOL)
PLEASE ALSO USE RELEVANT INTERFACE DESCRIPTIONS, SUCH AS .20 IS FOR INTERNET, .40 IS FOR INTRANET, INTERFACE WITH PUBLIC IP POOL IS
FOR LAN SIDE USE, THE INTERFACE WITH P2P PRIVATE IPS IS TOWARDS HEC-RCP (WAN SIDE).
show running-config
Building configuration...
Current configuration : 3067 bytes
!
! Last configuration change at 15:16:48 Pk-Asia Mon Dec 22 2014
! NVRAM config last updated at 13:19:40 Pk-Asia Mon Dec 22 2014
! NVRAM config last updated at 13:19:40 Pk-Asia Mon Dec 22 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname
!
boot-start-marker
boot-end-marker
!
!
!card type command needed for slot 1
! card type command needed for slot/vwic-slot 2/1
!
aaa new-model
!
!
!
!
!
!
!
aaa session-id common
clock timezone Pk-Asia 5 0
clock calendar-valid
no network-clock-participate slot 2
!
no ipv6 cef
ip source-route
ip cef
!
!
!
!
!
ip domain name
multilink bundle-name authenticated
!
!
!
!
!
crypto pki token default removal timeout 0
!
!
voice-card 0
!
voice-card 2
!
!
!
!
!
!
!
license udi pid C3900-SPE100/K9 sn FOC15400XNH
hw-module sm 1
!
hw-module sm 2
!
!
!
!
redundancy
!
!
!
!
!
!
interface Loopback0
ip address 10.31.101.82 255.255.255.255
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 121.52.147.112 255.255.255.240
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
duplex auto
speed auto
!
!
interface GigabitEthernet0/2.20
encapsulation dot1Q 20
ip address 172.31.69.72 255.255.255.252
!
!
interface GigabitEthernet0/2.40
encapsulation dot1Q 40
ip address 10.31.69.72 255.255.255.252
!
router ospf 2
redistribute connected subnets metric 40 route-map ospf-default
network 172.31.69.72 0.0.0.3 area 0
!
!
router ospf 4
redistribute connected subnets route-map ospf-default
network 10.31.69.72 0.0.0.3 area 0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
access-list 10 permit 121.52.147.112 0.0.0.15
!
nls resp-timeout 1
cpd cr-id 1
route-map ospf-default permit 10
match ip address 10
set metric-type type-2
!
snmp-server community string RO
snmp-server location
snmp-server contact
test.rsc (3.42 KB)