Trunk Cisco Swti - RB750

RouterOS General
1

Hello All

I am new here, and sorry cause my English is very bad.

Well, my problem is I dont know how do a trunk between Cisco and Mikrotik

the Cisco have this:
interface FastEthernet5/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,71
switchport mode trunk

No have the VTP server, the VTP is shut and vlan mode transparent.

I like to this in the RB750
Port1: Wan, connect to the Cisco and have trunk, the vlan 10 and 71.
loop1: and IP of the vlan 10 to remote administration of RB750
Port2-5 mode access vlan 71 on Cisco swtich.

Any one can help me to know how do it?

Thank you .

2

You can find more info on the VLANs and Trunking here:
http://wiki.mikrotik.com/wiki/Manual:Interface/VLAN

What you’re trying to do is pretty simple. I’m sure that when you read through this wiki page it will make more sense to you. If not, feel free to ask more questions :smiley: