i’ve followed this article
http://wiki.mikrotik.com/wiki/802.1q_Trunk_extension_over_Wireless_P2P_Link#C._Add_vlan_interfaces_to_the_corresponding_bridge everything works, but i need to acquire acces to these AP’s (and to switches which are conntected to second AP) with assigned IP, and i dont know how to, can anyone help me with this? i’m using two SEXTANT G-5HnD
if i have understood you correctly, you have made bridged network, if so, all the devices there is part of same Ethernet subnetwork (broadcast domain), so if you assign IP addresses from the same subnet, you should be able to reach all the devices.
this network is not fully bridged, it’s using VirtualAP’s to forward traffic through specified vlan, so if IP is assigned on any bridge or ether1 or wlan1 device is not reachable with winbox or snmp server