Good morning,
Next, I am separating two vlan link by passing the same radio link. Following the link - http://wiki.mikrotik.com/wiki/SwOS/Router-On-A-Stick.
scenario:
01 - RB250
Port1 - Trunk - vlan1
Port2 - Link1 - Vlan200
Port3 - Link2 - Vlan300
|
| Link
|
02 - RB250
Port1 - Trunk - vlan1
Port2 - Link1 - Vlan200 - Server1
Port3 - Link2 - Vlan300 - Server2
The second link is working, only that in Statistica is generating errors as shown in the picture.
