Two gateways...How to?

RouterOS Beginner Basics
1

Hi,

I need your help. I have 2 MT switches. One in UK and one in Poland. I am currently in Poland and I want use UK Netflix. I have problem how to set up my PL MT properly.

My MT consists with 5 ports. I set up so far:

  • Bridge_PL with Port 1 & 2 & 3 with DHCP Client, Port 1 is connected to my Router providing access to internet (GW 192.168.1.1) (Works),
  • Bridge UK with Port 4 & 5 and WiFi and DHCP Server (Works),
  • SSTP_UK connected to my UK MT (Works).

Now cherry! How to set up in Routing? Gateway 192.168.1.1 from DHCP for Bridge_PL and in same time Gateway SSTP_UK for Bridge_UK?

Thanks a lot in advance

Ad

2

Configured as switches I dont believe MT devices can do what you want.
YOu need the Main Routers to be MT, or the switches configured as Router & Switch and in this case you will have a double NAT scenario to work through as well.
If so, I have done so with wireguard on the beta firmware.

3

Hmmm…I think there is solution but my experience is on low level. I believe the key is to add routs properly somehow :frowning:

4

Routes where?? (which devices)?