two "hap ac lite" as AP over 10 meters behind walls

RouterOS Wireless Networking
1

Hello,
I need your help to understand the wifi range A Microtik Hap Ac Lite can reach.
I need to configure this Two devices as AP Bridged, because i need to
connect two different locations divided by a road.
There probably may be at least 8-10 meters from location-A to
location-B (behind their structure walls).
Thank you

2

The big problem are the walls. Both devices will probably connect, but the throughput won’t be much (my estimate is a few Mbps assuming low external interference).
You should avoid walls, at least place both devices at windows (plain glass, not some gass-filled twin-glass windows or glass covered with metallic foil), ideally you’d use some outdoor devices mounted on buildings walls or roofs.
2.4GHz behaves better than 5GHz in such conditions …

3

Hello thank you for the reply,
The location its a restaurant, therefore i can’t place the devices up on windows, it will be too much kind unstylish.
then, i’d exclude this option, i will see if there is a space where to place it avoiding eye contact by the restaurant customers.
if you got some other ideas let me know!

Thank you.
M.

4

Some thoughts.
Using the omni directional hap ac lite behind walls in an area probably already congested with 2.4/5Ghz wifi is bound to be problematic.

Suggesting the following which completely avoids wifi congestion and provides very fast/stable connection.
They are not ugly and are actually small for a window placement!
185 x 85 x 30 mm (7.28 x 3.35 x 1.2 in)

https://mikrotik.com/product/wireless_wire

In the restaurant you can ethernet from this unit to the HAP AC LITE which can then distribute wifi within the restaurant.