TX/RX BW Test

RouterOS Wireless Networking
1

Hi,

i tested my link using bw test.
I did the following tcp protocol test:
Only RX:22Mbps

Only TX:22Mbps

Both
TX:8Mbps
RX:18Mbps

I can’t understand why in both modality the values are so different!

Thanks,
Levis

2

Look at your CPU usage…

When you Rx or Tx it comes up to a 100% and you get 20Mbps (100% CPU = 20Mbps)
But when you do both you can get ex. 16Mbit Tx and 4Mbit Rx at a 100% CPU…
And you get 26Mbit and that’s nice IMO…

3

Hi,
but I prefered 10Mbps in tx and 10Mbps in rx!


Thanks.

4

Add a Simple Queue

Something like this:
/queue simple
add max-limit=10000000/10000000

5

Hi,

but this link is shared, it’s used from several pppoe user.
Do I need tuning better both antennas?

Thanks
Levis

6

What are your signal strengths, CCQ and noise floor on each end of the link?

7

Base 1 :

Tx/Rx SS: -66/-66 dBm

Noise Floor: -100dBm

Tx/Rx CCQ: 60/53%


Base 2 :

Tx/Rx SS: -66/-66 dBm

Noise Floor: -94dBm

Tx/Rx CCQ. 87/???%

8

CCQ is your problem…

9

in base 1?

I have to tuning better end 1?

thanks…

10

Have you changed frequencies? Might be interference…

11

I’ll try asap…

thanks