When I issue the command “ip” + “neighbors” + “print” I get this output
[xarxa@TDL] /ip neighbor> print
# INTERFACE ADDRESS MAC-ADDRESS IDENTITY VERSION BOARD
0 ether2 10.139.130.69 00:15:6D:3A:54:C2 TDLSant... XS5.ar2...
1 ether2 172.25.33.9 E4:8D:8C:0A:3D:93 TDLCamp... 6.40.5 ... RB3011UiAS
2 ether2 172.25.66.1 E4:8D:8C:1F:47:2E TDLTabo... 6.40.5 ... RB1100AHx2
3 ether4 10.139.238.195 00:15:6D:82:7C:74 TDLPunt... XS5.ar2...
4 ether4 10.139.238.196 00:27:22:C6:94:79 wds-TDL... XS5.ar2...
5 ether5 10.139.130.69 00:15:6D:3A:54:C2 TDLSant... XS5.ar2...
6 ether5 10.139.130.71 04:18:D6:2A:E0:99 tdlcire... XW.v5.5.7
7 ether6 10.139.238.36 00:15:6D:B0:2B:70 simoRd1 XS5.ar2...
8 ether7 10.139.130.99 80:2A:A8:74:43:92 TDLSant... XW.v6.0.4
9 ether7 10.139.130.102 00:27:22:70:01:6A TDLSant... XM.v5.3.5.
10 ether7 10.139.130.103 DC:9F:DB:36:B3:36 TDLMajo... XM.v5.5.3
11 ether7 10.139.130.117 44:D9:E7:7E:6F:FA NodeSeb... XW.v5.6.2
12 ether7 10.139.130.119 00:27:22:20:D6:10 NanoSta... XM.v5.6.15
13 ether7 10.139.130.121 DC:9F:DB:6E:2F:42 NanoSta... XM.v5.5.4
14 ether7 172.25.33.18 00:27:22:9A:5E:FA TDLCamp... XM.v6.1.3
15 ether8 172.25.33.22 24:A4:3C:46:0F:6F TDLCamp... XM.v6.1.3
[xarxa@TDL] /ip neighbor>
===
I dont care about “Version” field, but would like to see full “Identity” field
Is there any easy way to display it ? In fact I am interested only in “ip” and “ident” fields
I know the “full” command as “print detail” but that output is way too large.
Thanks.