Hello Gents,
I am really struggling with a router Mikrotik Chateau LTE12, I would like to configure 2 SVI for 2 Vlans 10 and 20 and assign ether1 for Vlan10 and ether2 Vlan20.
I have followed many forums but at each time it fails to reach to the SVI iP address from PCs connected to access Port ether1 and 2.
The vlans are configured on interface section and they are connected to bridge1.
The ether1 and ether2 are configured as untagged and the VID is 10 and 20.
IP address of the gateways are linked to the Vlans interfaces.
The vlan filtering is activated.
Please can any one help on this by sharing the right way to do it.