Unable to get LACP (802.3ad) to work with Synology NAS and CRS-125-24G-1S

RouterOS Beginner Basics
1

Hi!

I’m new to MikroTic and RouterOS but does have some experience with other brands. I just can’t get LACP (802.3ad) to work with my new CRS-125 (RouterOS v6.27). It works flawless with a TP-Link TL-SG3216.

Shouldn’t the bonding be connected to the ether1-master-local as all the other ports in some way? I just can’t figure out how to do it.

Are there any obvious errors in my config below? I think I’ve reset it like 10 times now and are out of clues :slight_smile:

set [ find default-name=ether1 ] name=ether1-master-local

set [ find default-name=ether2 ] master-port=ether1-master-local name=\
    ether2-slave-local

set [ find default-name=ether3 ] master-port=ether1-master-local name=\
    ether3-slave-local

set [ find default-name=ether4 ] master-port=ether1-master-local name=\
    ether4-slave-local

set [ find default-name=ether5 ] master-port=ether1-master-local name=\
    ether5-slave-local

set [ find default-name=ether6 ] master-port=ether1-master-local name=\
    ether6-slave-local

set [ find default-name=ether7 ] master-port=ether1-master-local name=\
    ether7-slave-local

set [ find default-name=ether8 ] master-port=ether1-master-local name=\
    ether8-slave-local

set [ find default-name=ether9 ] master-port=ether1-master-local name=\
    ether9-slave-local

set [ find default-name=ether10 ] master-port=ether1-master-local name=\
    ether10-slave-local

set [ find default-name=ether11 ] master-port=ether1-master-local name=\
    ether11-slave-local

set [ find default-name=ether12 ] master-port=ether1-master-local name=\
    ether12-slave-local

set [ find default-name=ether13 ] master-port=ether1-master-local name=\
    ether13-slave-local

set [ find default-name=ether14 ] master-port=ether1-master-local name=\
    ether14-slave-local

set [ find default-name=ether15 ] master-port=ether1-master-local name=\
    ether15-slave-local

set [ find default-name=ether16 ] master-port=ether1-master-local name=\
    ether16-slave-local

set [ find default-name=ether17 ] master-port=ether1-master-local name=\
    ether17-slave-local

set [ find default-name=ether18 ] master-port=ether1-master-local name=\
    ether18-slave-local

set [ find default-name=ether19 ] master-port=ether1-master-local name=\
    ether19-slave-local

set [ find default-name=ether20 ] master-port=ether1-master-local name=\
    ether20-slave-local

set [ find default-name=ether21 ] name=ether21-slave-local

set [ find default-name=ether22 ] name=ether22-slave-local

set [ find default-name=ether23 ] master-port=ether1-master-local name=\
    ether23-slave-local

set [ find default-name=ether24 ] master-port=ether1-master-local name=\
    ether24-slave-local

set [ find default-name=sfp1 ] master-port=ether1-master-local name=\
    sfp1-slave-local

/interface bonding

add mode=802.3ad name=bonding1NAS01 slaves=\
    ether21-slave-local,ether22-slave-local

/port

set 0 name=serial0

/ip address

add address=192.168.0.4/24 comment="default configuration" interface=\
    ether1-master-local network=192.168.0.0

add address=192.168.0.7/8 interface=ether21-slave-local network=\
    192.0.0.0

/ip dns

set servers=192.168.0.2

/ip route

add distance=1 gateway=192.168.0.2

/system clock

set time-zone-name=Europe/Stockholm

/system ntp client

set enabled=yes primary-ntp=192.168.0.2

Thanks in advance!