Hey,
I am using PBR in which I have WAN1 & WAN2 with public IP configured & LAN1 & LAN2 with private IP’s configured. The problem is that I am unable to ping internet from WAN2 IP Address & also unable to ping WAN2 IP Address form outside. WAN1 is working properly. Screen shot is attached for the review. Any suggestion.
Regards’
You didn’t really provide any useful info, so nobody here can know what your config is. But if you read and understand this page:
https://wiki.mikrotik.com/wiki/Manual:PCC
specifically what all those mangle rules do (there’s not too many of them), there’s a good chance you’ll be able to solve your problem.
Hello, the problem should be from your routing table. You need mangle rule + correct route for your setup.