Can someone please help me get UPNP working? I enabled all three options under UPNP and I have added my PPOE client for my DSL as my external interface and I have added my local interface as my internal interface. I still can’t get my computers to see the router after multiple times enabling UPNP and disabling it? Can someone help me figure out what I’m doing wrong?
I cant see the router under windows network discovery. I used UNPN test and the router doesnt show up. Plus when I turn on a UNPN device no rules are created. Here are some rule prints for info…
[Cormacs@MikroTik] /ip firewall filter> print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; default configuration
chain=input action=accept protocol=icmp log=no log-prefix=“”1 ;;; default configuration
chain=input action=accept connection-state=established,related
log=no log-prefix=“”2 ;;; allow l2tp
chain=input action=accept protocol=udp dst-port=1701 log=no
log-prefix=“”3 ;;; allow pptp
chain=input action=accept protocol=tcp dst-port=1723 log=no
log-prefix=“”4 ;;; allow sstp
chain=input action=accept protocol=tcp dst-port=443 log=no
log-prefix=“”5 ;;; default configuration
chain=input action=drop in-interface=Modem 1 log=no log-prefix=“”6 ;;; default configuration
chain=forward action=fasttrack-connection
connection-state=established,related log=no log-prefix=“”7 ;;; default configuration
chain=forward action=accept connection-state=established,related
log=no log-prefix=“”8 ;;; default configuration
chain=forward action=drop connection-state=invalid log=no
log-prefix=“”9 ;;; default configuration
chain=forward action=drop connection-state=new
connection-nat-state=!dstnat in-interface=Modem 1 log=no
log-prefix=“”
[Cormacs@MikroTik] /ip firewall mangle> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=prerouting action=accept dst-address-list=!Modems
in-interface=Tek Savvy log=no log-prefix=“”
[Cormacs@MikroTik] /ip firewall nat> print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; masq. vpn traffic
chain=srcnat action=masquerade src-address=10.0.3.0/24 log=no log-prefix=“”1 chain=srcnat action=masquerade src-address=10.0.0.0/24 out-interface=Tek Savvy log=no log-prefix=“”
2 chain=srcnat action=masquerade dst-address=10.0.1.1 out-interface=Modem 1 log=no log-prefix=“”
3 chain=srcnat action=masquerade dst-address=10.0.2.1 out-interface=Modem 2 log=no log-prefix=“”
4 chain=dstnat action=dst-nat to-addresses=10.0.0.101 to-ports=80 protocol=tcp in-interface=Tek Savvy dst-port=80 log=no log-prefix=“”
5 X ;;; Xbox One
chain=dstnat action=dst-nat to-addresses=10.0.0.124 to-ports=3074 protocol=udp in-interface=Tek Savvy dst-port=3074 log=no log-prefix=“”6 X ;;; Xbox 360
chain=dstnat action=dst-nat to-addresses=10.0.0.118 to-ports=3074 protocol=udp in-interface=Tek Savvy dst-port=3074 log=no log-prefix=“”
[Cormacs@MikroTik] /ip upnp> print
enabled: yes
allow-disable-external-interface: yes
show-dummy-rule: yes
[Cormacs@MikroTik] /ip upnp interfaces> print
Flags: X - disabled, D - dynamicINTERFACE TYPE FORCED-EXTERNAL-IP
0 Local internal
1 Tek Savvy external
[Cormacs@MikroTik] /interface> print
Flags: D - dynamic, X - disabled, R - running, S - slaveNAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU MAC-ADDRESS
0 R Local ether 1500 1598 2028 4C:5E:0C:04:AF:43
1 R Modem 1 ether 1500 1598 2028 4C:5E:0C:04:AF:42
2 R Modem 2 ether 1500 1598 2028 4C:5E:0C:04:AF:46
3 Unused1 ether 1500 1598 2028 4C:5E:0C:04:AF:44
4 Unused2 ether 1500 1598 2028 4C:5E:0C:04:AF:45
5 R Tek Savvy pppoe-out 32715