USB 3G modem : ZTE MF667 model

ebe · December 12, 2013, 9:34am

Hello:

I am trying to configure a USB 3G modem : ZTE MF667 model.

[admin@MikroTik] > /system resource usb print

DEVICE VENDOR NAME SPEED

0 1:1 RB400 EHCI
1 1:7 ZTE,Incorporated ZTE WCDMA Tech

[admin@MikroTik] >
[admin@MikroTik] > /port print
Flags: I - inactive

[admin@MikroTik] >

Any idea why not on /port print

Regards

uldis · December 12, 2013, 11:52am

please try to contact the support@mikrotik.com for a test release of v6.8rc1 and provide then a support output file.

Poekel · May 8, 2014, 6:38pm

Is there a fix for this? I’m trying to also get a MF667 to work. I use the latest version 6.12.

Regards

NetworkPro · July 17, 2014, 5:17am

Did anyone got these working?

I am sending a supout.rif to support but our project will force us to replace the modem with another one due to tight scheduleds.

BR.

Unic · August 6, 2016, 6:22pm

This stick works including sms.

Dial Command: ATDT
Data and Info Channel 1

But you need to enable serialmode and disable CD-Rom. You can do this from a Windowspc :

Insert the stick and install it. Backup the files from the virtual CDRom. Visit: “http://192.168.0.1/goform/goform_process?goformId=MODE_SWITCH&switchCmd=FACTORY” to enable serialconsole. maybe you need to and log in to the serialconsole and send “AT+ZCDRUN=8 disable”

I needed to find the serialdrivers on the net to pass the command from windows, but i think you can send them from Routeros too.