on hAP ax lite,
create a bridge called br
/interface bridge
add name=br
Add all ports to br you may disconnect from hap, reconnect again and check if all ports have been added
/interface bridge port
add bridge=local.br interface=ether1
add bridge=local.br interface=ether2
add bridge=local.br interface=ether3
add bridge=local.br interface=ether4
create a datapath
/interface wifi datapath
add bridge=br disabled=no name=datapath-slave
turn hap ax into cap
/interface wifi cap
set certificate=request discovery-interfaces=br enabled=yes lock-to-caps-man=
yes slaves-datapath=datapath-slave slaves-static=yes
Set dhcp on br
/ip dhcp-client
add interface=br
Go to the hap ax and select the wifi interface datapath “datapath-slave” for the wifi interface