user manager and hotspot on different ends

RouterOS The User Manager
1

Hi,

I have a question, I would like to use the usermanager with a RB433H and the hotspot on another RB433 with R52H, how should I do the config, I made it work with both in one RB433H with the IP of the hotspot 127.0.0.1
should I put the IP of the hotspot with the IP of the new equipment? or what should I do in order to make the configuration

I created another topic but I think I didn´t make myself clear enough. I want to use 4 equipments 1 for usermanager, 1 switch, and the other 2 just as AP to put a hotspot in each one, in order to create 2 hotspot with the same user manager

Thanks for your responses

2

Your usermanager does everything by radius.. you need to set your hotspot AP’s to use radius and set the usermanager radius information up in it.

Then you can have a centralized usermanager and hotspots anywhere in or out of your network.

I have been running usermanager for 2 years with this setup and have AP’s on my wireless network and in another town that is using dsl.

works great!

3

you were right man…it works great

thanks for your help it´s working perfect just as you said