Using RB260GSP to power up DynaDish5 with POE

RouterOS General
1

Hi!
My goal is using RB260GSP switch and using its built in POE-out ports to run DynaDish5!
Question is - it will work?

By specification i can read that DynaDish5 need 16W, the RB260GSP on each port provides only 500mA!
RB260GSP is capable work with voltage 8-30V so by calculations with standard 24v power supply it cant be done, because it need 0,66mA,
but with 30v power supply it (almoust) can work - it need 0.54mA! (i guess 16W is maximum!)
So maybe someone can mark me, or i get approval that it is correct! Maybe someone have tried something similar?

2

PoE output RB260GSP only: Passive PoE output on ports 2-5. Max current 1A per port

http://i.mt.lv/routerboard/files/RB260GS-140417124849.pdf

3

Oh! What have i looked up!! Realy its 1A so it means with 24v - i can power up 24Watts! So it should go smooth! Still someone tried?

4

No problem at all I using on two places 260GSP powering DynDish it is working for I while.
Of course on 260GSP is connected more device on frist one 2xBaseBox and LHG5 on second plus two more 911ac it is workiign no rpoblem at all after firmware 1.16.

If you buy 260GSP update to 1.16 or new version.

5

Great! That fine for me! Thanks man!