Using RB750UP as a POE switch

RouterOS General
1

I’m currently looking to use the MikroTik RB750UP as a POE switch.

I’d like to try and set up something similar to port based vlan.

Is there anyway to separate the ports without using vlan id’s?

Thanks!

2

Ive been using RB750UP’s all week using Vlans,

try having a look at the switch ports or possibly if your not wanting to use Vlans perhaps just adding the ether ports to bridges,

the vlan method you could either put a tagged vlan on the ether port or pvid it

Kev

3

Thanks for the reply kev.

I ended up just bridging all 5 ports and setting up each ethernet interface with Horizon.

Worked like a charm!