v2.9.26 released..

oriondotnet · June 15, 2006, 2:28pm

What’s new in 2.9.26:

*) removed support for MMS connection tracking - it did not work as it should;
*) fixed unsetting of ppp secret local and remote addresses;
*) added ping option to ppp active sessions in WinBox;
*) added total statistics for Torch in WinBox;
*) fixed problem with static ARP entries not added after reboot
on the bridge interface;
*) dns cache max tll setting did not apply to negative records;
*) fixed some memory leaks in dns cache;
*) fixed BGP bugs in routing-test;
*) fixed RIP bugs in routing-test;
*) fixed bug - some stale PPPoE, PPTP and L2TP dynamic interfaces were not removed;
*) added logging of ups events;
*) added support for more then 2 USB serial ports;
*) fixed to save system logging echo messages every 30s and not immediately;
*) fixed scrolling in WinBox;
*) fixed bug - command output executed directly through ssh sometimes got
trimmed;
*) user manager - customer page added
*) user manager - active session page added
*) user manager - report performace improved
*) user manager - GUI improved

Anyone can help me test the bgp & ospf please.. want to put this 1 into our production router

advantz · June 15, 2006, 5:12pm

oriondotnet:

What’s new in 2.9.26:

*) removed support for MMS connection tracking - it did not work as it should;
*) fixed unsetting of ppp secret local and remote addresses;
*) added ping option to ppp active sessions in WinBox;
*) added total statistics for Torch in WinBox;
*) fixed problem with static ARP entries not added after reboot
on the bridge interface;
*) dns cache max tll setting did not apply to negative records;
*) fixed some memory leaks in dns cache;
*) fixed BGP bugs in routing-test;
*) fixed RIP bugs in routing-test;
*) fixed bug - some stale PPPoE, PPTP and L2TP dynamic interfaces were not removed;
*) added logging of ups events;
*) added support for more then 2 USB serial ports;
*) fixed to save system logging echo messages every 30s and not immediately;
*) fixed scrolling in WinBox;
*) fixed bug - command output executed directly through ssh sometimes got
trimmed;
*) user manager - customer page added
*) user manager - active session page added
*) user manager - report performace improved
*) user manager - GUI improved

Anyone can help me test the bgp & ospf please.. want to put this 1 into our production router

OK I’ll try this version because it’s FIXED(?) BGP, see ya

alex_rhys-hurn · June 15, 2006, 8:50pm

Download Packages: routeros-x86
verify file sizes and descriptions.
Upload to Router.
Reboot Router
Then:

Loading System with Initrd
Uncompressing linux…
Execve: 00000002
Kernel Panic: Attempted to Kill Init

Does anyone have any ideas?

How do I reinstall this without screwing up my license?

pekr · June 15, 2006, 9:06pm

Better wait for some guru to confirm, but IIRC we just burned image to CD, and installed once again. All settings and license were ok …

good luck,
Petr

alex_rhys-hurn · June 15, 2006, 9:13pm

Thanks for sitting up and keeping me company…

well do I burn the .26 image or do I put back the .25 image

If its the .25 image, do you have one cos I dont see it on the mt site anymore…

Its s demo box so I am going to try the .26 image.

Cheers

Alex

Mitak · June 15, 2006, 9:27pm

I think taht when you reinstall /or upgrade/ MT your license key & configuration will be NOT touched?

alex_rhys-hurn · June 15, 2006, 9:43pm

Just like you said.

Burn the .26 image to cd, reboot install and remember to KEEP THE OLD SETTINGS…

Worked fine.

Thanks

advantz · June 16, 2006, 12:52am

Anyone can confirm if this “kernel panic” occures in x86 system?
Because I’m running 15km remote router, don’t want to screw up the router.
thank you

cdemers · June 16, 2006, 2:21am

I have experienced no kernel panics on my upgraded test routers, both x86 and rb500 units. I have a few more to do that are not critical and will be testing further before upgrades to primary routers.

Gotmoh · June 17, 2006, 5:47am

I did upgrades on two routers. Some away from me and some high . Previous both was 2.9.24. No problems with both routers.

Beccara · June 17, 2006, 6:02am

Upgraded All non-core system - Upgraded Fine, BGP/NStream Wifi Setup’s with nothing really special running and they are all humming along, another day and core systems will be upgraded

nikhil · June 17, 2006, 8:22am

2.9.25 → 2.9.26 upgrade , bgp , policy routes etc all working. Intel NIC problem still exists already mailed MT for it.

believewireless · June 17, 2006, 1:57pm

2.9.26 with web proxy and BGP seems to be eating memory and crashing on us. 2.9.25 was fine.

nikhil · June 17, 2006, 4:49pm

quickly send a supout.rif to MT

Alessio_Garavano · June 17, 2006, 5:49pm

2 MTs x86(webproxy, hotspot, dhcp, bridge rstp, NAT, QoS) and 4 RB512 and RB532(AP, bridge, WDS, bridge rstp, QoS, Atheros Cards) upgraded without problem, all work fine and best…
Good work guys!
Regards!
Alessio

jarosoup · June 17, 2006, 6:45pm

I’ve upgraded one Hotspot router which seems to be doing fine right now. Still waiting to see if the DNS cache holds up, but here’s to hoping! Thanks for addressing this problem Mikrotik

oriondotnet · June 18, 2006, 6:00am

Looks like this version is stable.. anyone can confirm the ospf is working fine ?

Thanks

nikhil · June 18, 2006, 6:14am

Uptime 2d 10:46:13

looks stable, use bgp but i had to disable routes taken in through filters because of 100% cpu utilization if both peers send routes. IF i do one peer its fine but 2 bgp in and its dead slow.

cdemers · June 18, 2006, 1:56pm

Just finished upgrades to our primary routers and everything went fine, no problems anywhere. Now time to go break it lol

oriondotnet · June 18, 2006, 2:27pm

Well.. already try to upgrade to v2.9.26 Is is normal is CPU load go to 100% when receiving route information ?

Thanks