Hi, I’ve discovered that we can run a V2Ray server from a mikrotik router using docker containers. But, can we connect to an existing V2Ray server as a client from routeros then route all network traffic through that connection as of a normal VPN connection? I didn’t find any useful guides on the we…

I have setup with Shadowsocks server in ROS container with v2ray plugin over TLS and with port tunnel setup, using ss-tunnel client on computer to open local port tunneled to ss-server I’m able to connect local Wireguard to ROS Wireguard. Trough that Wireguard connection I have internet connection o…

I have setup with Shadowsocks server in ROS container with v2ray plugin over TLS and with port tunnel setup, using ss-tunnel client on computer to open local port tunneled to ss-server I’m able to connect local Wireguard to ROS Wireguard. Trough that Wireguard connection I have internet connection…

I be interested to see how it’s done/works as well :slight_smile:

I don’t have Shadowsocks configuration any more since I switched to Xray using different protocol (vless-xtls-reality). But Xray also supports Shadowsocks protocol, it can be configured for it, but it is limited regarding tunneling, it can only tunnel connection to port over same IP protocol (TCP or…

Thanks for sharing your experience! It’s interesting to see how you’ve transitioned to Xray with the vless-xtls-reality protocol. I appreciate the insight on the limitations with Shadowsocks tunneling, especially regarding port restrictions. Your example with Wireguard over Xray sounds like a great …

I recommend this repo to you and there is also a video about it. v2ray on mikrotik [image] GitHub - Mikronet-plus/v2ray-on-mikrotik: How to use x-ray config on Mikrotik router This... How to use x-ray config on Mikrotik router This was always a challenge until the very good fe…

V2Ray Client on RouterOS

RouterOS General

Mikronet-plus August 22, 2025, 3:37pm 7

I recommend this repo to you and there is also a video about it.

v2ray on mikrotik