v5.20 released

RouterOS General
1

http://www.mikrotik.com/download

What’s new in 5.20 (2012-Aug-15 13:04):

*) manual upgrade to NEW beta poe controller firmware v2.0 for RB750UP and OmniTIK UPA;
more info at > http://wiki.mikrotik.com/wiki/Manual:PoE-Out
*) fix RB951-2n wireless issues;
*) ups - fixed resource leak;

2

uldis
PPP CPU Load ?

Still have an issue with reboot of RB751 - Ticket#2012080166000114] RB751U-2HnD - Reboot

3

Now that’s funny. NV2 nothing. Migrate to the Airmax UBNT. Clients will not wait

4

I hope for NV2 changes, but nothing. :frowning: :frowning:

5

What’s new in 5.20 (2012-Aug-15 13:04):
*) manual upgrade to NEW beta poe controller firmware v2.0 for RB750UP and OmniTIK UPA;
more info at > http://wiki.mikrotik.com/wiki/Manual:PoE-Out

Bravo! seems to work pretty good here.

6

very good for here!

7
  • Can’t seem to get the UPS to work from the USB port on a RB751G using 5.20…
    Connected ok under 5.19 but would not stay online longer than 5 minutes even if I set it to 60 minutes. UPS was online and ok.
    The UPS is a APC RS 1500.

See the image below…
Screen Shot 2012-08-15 at 6.36.36 PM.jpg

8

Very good.
problem solved at RB411AH + R52HN.
thank you very much.

regards
lazuardy

9

Very disappointed that no SSTP fixes made it into this release.

10

Have you actually tried it?

11

Hello Lazuardy! Which problem do you mean?

12

Could anyone please remind me what we’re specifically talking about?

13

ya, normis
I previously had trouble RB411ah / R52HN hangs after 6-7 hours at ROS v5.19, Downgrade v5.18 running but ccq ccq value is very small 20 % - 40 %, data rate and throuhput not good.
After upgrading to 5:20 RC1 and v5.20 released hotspot connection is stable.
The value of data rate, throughput is very good, it was ccq average 80% -90%.
Nice job :smiley: :smiley: :smiley:

RB411ah / R52HN AP bridge only
I using RB450G router.

14

it´s joke? no!

15

Show column Distance

16

real max 1km.
mikrotik distance max 3km, average 1km.

17

Upgrading to the new POE firmware (previous 1.10, and new 2.0) on RB750UP got problemes on ether5 when connecting a Rocket M5 to it.

With PoE firmware 1.10 it works well, but upgrading it to 2.0, it continously reboots de Rocket M5. We try it with two RB750UP units, and does the same.

If set “PoE Out” to auto on ether5 (nothing connected in it) and ether4 (Rocket M5 connected in it), the Rocket M5 reboots faster. And when set “PoE Out” in ether5, Rocket M4 on ether4 works fine.

18

What if you set it to “forced on”?

19

I seem to be getting better CCQ for NV2 in PtMP configuration. Can Mikrotik confirm that there were changes made to NV2? I’ll not deploy until someone confirms it. Thank you.

20

Minimal improvements have been done to the AR9344 Atheros driver, but mainly for RB951 and RB2011. It could have some effect on other AR9344 devices.