v6.0rc1 snmp does not work.

RouterOS General
1

ccr1036
freeradius snmp
cacti snmp

2

Give us more details. How did you determine it’s not working? Show us your SNMP config. Do you have firewall?

3

v6.0rc14 works.

but v6.1rc1

Sometimes
freeradius
snmpwalk -r 1 -t 5 -v1 -c ‘public’ ipaddress ifDescr
Timeout: No Response from ipaddress

cacti
snmp error

4

please give us remote access. email it to support.

it works with mine:

normis@Normundss-iMac:~/Desktop$ snmpwalk -r 1 -t 5 -v1 -c 'public' 10.1.3.1 ifDescr
IF-MIB::ifDescr.1 = STRING: ether1
IF-MIB::ifDescr.2 = STRING: ether2
IF-MIB::ifDescr.3 = STRING: ether3
IF-MIB::ifDescr.4 = STRING: ether4
IF-MIB::ifDescr.5 = STRING: ether5
IF-MIB::ifDescr.6 = STRING: ether6
IF-MIB::ifDescr.7 = STRING: ether7
IF-MIB::ifDescr.8 = STRING: ether8
IF-MIB::ifDescr.9 = STRING: ether9
IF-MIB::ifDescr.10 = STRING: ether10
IF-MIB::ifDescr.11 = STRING: ether11
IF-MIB::ifDescr.12 = STRING: ether12
IF-MIB::ifDescr.13 = STRING: bridge1
IF-MIB::ifDescr.14 = STRING: hotspot-7
5

Same here with ccr1036, it works and suddenly stops for 1 minute and start worck again.Using dude to see interfaces(pppoe), when click on interfaces it shows all conected interfaces, if i click on cpu and them back to interfaces then snmp stop for 1 min.

6

I’m using a CCR1036 with RouterOS v6.0 and The Dude could not reach the SNMP agent. If I restart the services it works for some minutes, then stops working again.
I think it happen with my AHx2 too. Thank you.

7

The same here

Enviado desde mi GT-P5110 usando Tapatalk 2

8

Working fine in 6.1!! Thnx!!!