If you are already running a RouterOS 6 install, Simply click “Check for updates” in QuickSet, Webfig or Winbox packages menu.
What’s new in 6.11 (2014-Mar-20 09:16):
*) ipsec - fix aes-cbc hardware acceleration on CCR with key sizes 192 and 256;
*) wireless - add auto frequency feature;
*) ovpn - fixed TLS renegotiation;
*) ovpn - make bridge mode work with big packets (do not leave extraneous padding);
*) ovpn - fixed require-client-certifcate;
*) ppp - revert RADIUS NAS-Port behaviour, report tunnel interface id;
*) ppp - mppe encryption together with mrru locked the router;
*) dhcp - added support for DHCP option 138 - list of CAPWAP IPv4 servers;
*) quickset - added Guest Network setup to Home AP mode;
*) console - no longer required to supply value of ‘/routing bgp instance vrf’
property ‘instance’ for ‘add’ command;
*) ethernet - added option to enable rx/tx flow control
(will be disabled by default);
*) ethernet - added ability to specify advertised modes for copper ports;
*) fixed 100% cpu usage on CCRs;
*) ssl - not finding CRL in local store for any certificate in trust chain will cause connection to fail;
*) lte - support for Huawei ME609 and ME909u-521;
Available separately, is a new Wireless-FP package, which includes the new CAPsMAN feature. This is a beta package, so use only in controlled test networks. The package will replace your default Wireless package upon installation, which means it will also add wireless functionality changes and improvements, not only CAPsMAN. More information about the Wireless Controller (CAPsMAN) is here: http://wiki.mikrotik.com/wiki/Manual:CAPsMAN
What’s with bug described in topic “6.x is useless” which has disappeared from forum and only Miktotik knows why. Prolem is also described in Ticket#2014022266000216
It will do scan, and choose the least occupied frequency automatically. This happens only once, when you apply this setting, reboot, or disable/enable interface. Similar to DFS, but with no radar-detect.
We tried Wireless Package and 6.11 and see very good improvements on Upload throughput (CPE to Access Point with NV2 protocol)
A client with, before 9Mbps now reach 25-30Mbps
What syntax 1S/2S stand for?
Unfortunately I still see high latency when the line is not in use.
And the other problem, that persists, is that a cell with a client who have 25Mbps of bandwidth and another that makes 7Mbps, if launched simultaneously both go to 7Mbps.
The cpe with problems degrade much all other customers
RB450G and 2011UiAS-2HnD upgraded without any problems.
RB450 had to be rebooted again a couple of minutes later, since the cpu was averaging at about 45%, but after the reboot it went down to the usual <7% average.
