No, but please, be smart too…before trying to teach please learn to read…and use fair-play…please, perhaps,…
What can provide fastrack if trafic over a pure software based not optimized ppoe client implementation?
This combination of both works like a charm in two tested mono-CPU devices…shared by other contributors in this same topic and configuration.
Ooppss *) pppoe-client - implemented fastpath support… ???
it works over RB2011 but it does NOT works over RB3011.
Same fiber connection (300/30 Mbits) and RouterOS configuration testing RB2011 and RB3011, with these results:
Symthom: FP RX counter for PPOE client conection is always zero in RB3011 (not for FP TX…)
*) l2tp - added support for proxy authentication when receiving forwarded PPPoE sesssions;
*) l2tp - added support for Hidden AVP, it is needed for proxy authentication;
I’m presuming this only means that LNS functionality is working and that I still cannot use Mikrotik as a LAC to do Proxy LCP to a Cisco PPPoE server?
Will I ever be able to???
tok, tok…
vlan not working on bridge interfaces
Hi,
I have two wireless stations where I want to use and share their connection as access point. I am using the first as the main and the second a backup.
I have used as below:
WLAN 1: Station 1
WLAN 2: AP
WLAN 3: Station 2
Untitled.png
When routing only WLAN 3 as station to WLAN 2 as access point on high loads over 50kbps I am facing interruptions.
Any idea?
Many many many thanks for implementing fastpath over pppoe. It is a highe improvement to be able to keep using (and recommending) your routers to those people with ISPs using PPPoE.
Kudos!
Background scan with NV2 protocol please! Are you work in the backround spectral scan? It would be a ubnt mouth shut!
Thanks for all the nice things!
Version 6.35rc14 has been released.
Changes since previous version:
*) dude - (changes discussed here: http://forum.mikrotik.com/t/the-dude-work-continues-v6-35rc-test-builds/94981/1);
*) pppoe-client - implemented fastpath support;
*) pppoe - added rfc4679 support;
*) pppoe-server - added pado-delay option;
*) ppp - close connection if peer wants to re-authenticate;
*) winbox - added missing modp8192 to /ipsec peer dh-group;
*) winbox - limit ospf key to 16 symbols;
*) snmp - fix cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;
*) mpls - do not reset VPLS on TE tunnel re-optimize;
*) lcd - add flip-screen option;
*) lcd - security screen did not show ip addresses on ccr;
*) interface queue - fixed “no-queue” on upgrade;
*) fastpath - fixed rare kernel failure;
*) lte - fixed bandlux modem dialing;
*) wireless-rep - fixed qos frame-priroty when nv2 protocol used in station-wds mode;
*) wireless - improved 1-chain 802.11ac station campability with other vendor multichain APs.
If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
Nice work on all the new PPPoE features !
Voltage monitor on RB493G still not working.
can you share config for wireless-rep ?
can someone post how to config wireless-rep step by step? i’ve been searching over here and google but can’t find the answer
thx before
What happened with rc13?
Any of rc versions can be skipped for multiple reasons. It could be bad, it could be waiting for additional fixes/implementation to work properly, next version can be built before we launch previous one. There are multiple possibilities and that do not mean anything at all.
yes! +1 for that!
Mikrotik crew believe in fengshui that said number 13 is bad so that’s why they skip rc13 lol 
Version 6.35rc15 has been released.
Changes since previous version:
*) l2tp - implemented l2tp (and lns) initial fastpath support;
*) ppp - fixed ppp crash;
*) gre - fixed memory leak;
*) netinstall - fixed link negotiation for different sfp modules;
*) snmp - fixed dhcpv4 lease hwaddr format according to mib;
*) rb3011 - fixed high cpu load breaks ethernet stats.
If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
Iám running v.14 on 4 devices, sxt, Rb2011,BaseBox, without any Problems!
HAP ac on Version 6.35rc15 l2tp/ipsec is not working on windows 7. On 6.34.2 everything is working fine with same settings
Same here, since 6.35rc14. PPtP not working either. “Encryption method not supported” even without encryption. Opened a support ticket with supout (Ticket#2016030266000632).