v6.38.3 [current]

Announcements
61

Hey, DFS and radar detection isn’t working correctly since Version 6.37 :frowning:

My hAP AC (frequency put to “auto”) choose only the frequencies 5580 MHz and 5600 MHz. For what reason ever it detects a radar. With Version 6.36.4 and DFS radar detection on there is no radar signal detected.
I could live with this fact, but it detects the radar and will not choose another frequency. It waits for 10 minutes and run a test on the same frequency :open_mouth:, detects a radar signal and wait another 10 minutes and so on…
If i understand it correct it should take another frequency after detecting a radar signal and test this frequency.

Sparing the range from 5580-5600MHz forces the RB to use another frequency. There is no radar detected, but no client (iPhone 7, iPad Air 2, iMac 5k and Samsung S6) can see the SSID or connect to the AP. Weird.

I will stick to 6.36.4 until the DFS and radar detection work reliable :frowning: At the moment i’m more offline than online with 6.38.3. That is not acceptable.

62

Hi,
We are using the Mikrotik Board with product code: RB911-5Hn. I want to know the architecture of the board in context to networking.

63

Thank you about reports about “name-for-user already exists” problem. We will fix this as soon as possible. In future, please report directly to support@mikrotik.com so we can trace and fix problem much sooner.

64

Version 6.38.4 has been released:
http://forum.mikrotik.com/t/v6-38-5-current/106902/1