v6.46.1 [stable] is released!

Announcements
1

RouterOS version 6.46.1 has been released in public “stable” channel!

Before an upgrade:

  1. Remember to make backup/export files before an upgrade and save them on another storage device;
  2. Make sure the device will not lose power during upgrade process;
  3. Device has enough free storage space for all RouterOS packages to be downloaded.

What’s new in 6.46.1 (2019-Dec-13 12:44):

*) capsman - fixed CAP upgrading (introduced in v6.46);
*) console - fixed “clear-history” restoring historic actions after power cycle;
*) console - removed “edit” and “set” actions from “System/History” menu;
*) defconf - fixed default configuration loading after fresh install (introduced in v6.46);
*) dhcpv6-server - use lease time from RADIUS;
*) dude - fixed image and font file accessing (introduced in v6.46);
*) gps - only adjust system time after GPS signal is established;
*) health - fixed health reporting on OmniTIK 5 PoE ac;
*) ipsec - improved system stability when processing decrypted packet on unregistered interface;
*) l2tp - improved system stability when disconnecting many clients at once;
*) log - fixed “disk-file-name” parameter validation (introduced in v6.46);
*) lora - added support for MIPSBE, PPC, TILE and x86 architectures;
*) lora - improved confirmed downlink forwarding;
*) lte - do not reset modem when setting the same SIM slot on LtAP;
*) lte - show SIM error when no card is present;
*) ppp - fixed session establishment with high amount of tunnels (introduced in v6.46);
*) ppp - prioritize “remote-ipv6-prefix-pool” from PPP secret over PPP profile;
*) qsfp - do not show “sfp-wavelength” for cables that do not support it;
*) snmp - fixed health related OID polling (introduced in v6.46);
*) supout - fixed autosupout.rif file generation (introduced in v6.46);
) system - fixed ".auto.rsc" file execution (introduced in v6.46);
*) user-manager - fixed “db-path” parameter validation (introduced in v6.46);
*) webfig - fixed skin folder presence (introduced in v6.46);
*) winbox - fixed “allowed-number” parameter setting invalid value in “Tool/SMS” menu;
*) winbox - show “LCD” menu only on boards that have LCD screen;
*) wireless - added “russia4” regulatory domain information;
*) wireless - improved compatibility by adding default installation mode and gain for devices with integrated antennas;
*) wireless - improved compatibility for Switzerland wireless country profile to improve compliance with ETSI regulations;

To upgrade, click “Check for updates” at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this particular RouterOS release.

v6.46 [stable] is released!
RBSXTR&R11e-LTE6
v6.46.2 [stable] is released!
R11e-LTE6 cell selection
Mikrotik LHGG LTE6 kit (RBLHGGR&R11e-LTE6) freeze cell lock or band lock
LTE CAT6 modem disconnecting every 2-3 minutes
Webfig skins
LTE CAT6 modem disconnecting every 2-3 minutes
LTE CAT6 modem disconnecting every 2-3 minutes
SXT LTE6 Kit drops internet (EE UK)
2

*) wireless - added “russia4” regulatory domain information;
more info?

3

PREV: v6.46 [stable] is released!

  1. After upgrade from v6.46 to v6.46.1 at RB SXTR&R11e-LTE6_v20
  • CellLock was disabled and I must setup it again
  1. CellLock when loose signal for BOTH Band’s at ~3 second then
  • RSRQ = -195 dB


  • other signal parameters are freez


  • fraffic is no Rx at lte1


  • SMS are not work any direction


  • lte1 is still up, Public IP is still assigned


  • It’s not go to 3G/UMTS - modem freez and not do anything

To fix this we can:

  • reboot by hand/script/watchdog etc


  • re-enable interface


  • Set Cell Lock again or reset it


  • Try send SMS… and lte1 go down and do initialisation lte1


  • Try check firmware version of lte1 modem… and lte1 go down and do initialisation lte1

.
To detect it faster I setup Traffic Monitor who check lte1 rx=0 and rsrq=-195.
winbox_v3.20_64_Aan5lU4Dxk.png
.
https://help.mikrotik.com/servicedesk → SUP-3785
BTW. Cell-Monitor in v6.46 is fix and show correctly the EARFCN column data.

4

RB850Gx2 still fails install verification post-install :frowning:

Specific error: “Couldn’t continue - damaged routeros-powerpc package: bade image (6)”

Router was usable in this state and I was able to backout to 6.45.7 again.

5

these random ‘could not save package’ errors need to stop.
/sys sup-output
failed to create supout.rif file

6

skins are still not working as expected on 6.46.1 on the RB750Gr3s i tested.

on the presence of flash/ filesystem, skins should be placed on flash/skins/filename.json. When saving new skins using Design Skin, they are saved on /skins/file.json. The skin works if i choose them, however these files on will always be vanished on reboot, as they should be placed on flash/ and not .

On System/Users/Groups, dropbox gives me the files present on flash/skins to select, but they are never applied. If i got the same filename on flash/skins/file.json and skins/file.json, they are now applied. But as explained, those files on /skins will vanish on the next reboot. Thus that’s not a good place to have the skin files.

There’s still some work to do on skins detection/usage on boards with the flash/ filesystem.

7

Looks like generally stable release to try with? Only a few reports so far :wink:

8

Design Skin still not work. I upgrade one of my Router from 6.46 to 6.46.1 (RB450G) to test Design Skin but it still shown all menu for user which I assigned custom skin to show only hotspot and some menu.

Jason file save on /skins/filename.json.

9

nimbo78 - Execute this command on any router with wireless package - “/interface wireless info country-info russia4”.
SiB - Thank you for your report. We will look into this.
bcall - Do you mean that the “/system check-installation” feature is failing? Do you see this error on multiple devices or on a single router?
osc86 - Do you see this error on multiple devices or on a single router? What happens when you try to create a supout file?
leonardogyn, parinya1957 - The issue with the skins folder was resolved for the routers that do not have a flash directory. We will fix this problem in the next release.

10

My router was RB450G which do not have a flash directory but problem still happen.

11

This announcement does not show up under General or other sub “channels”. It only shows up under Announcement. Can we make it visible in all parts of the forum?
Edit: Fixed, thanks who ever fixed it! :slight_smile:

12

updating to 6.46.1 went smooth … from 6.46 to 6.46.1 done thru the dude :wink:
dude font problem fixed.
No problems so far

13

Delete

14

parinya1957 - Can you please send a supout file from this router to support@mikrotik.com? If I create a skin and set it to a specific user group, then it works for me without any problems.

15

russia4 wireless ranges

2402-2482/b,g,gn20,gn40(20dBm)
2417-2457/g-turbo(20dBm)
5170-5250/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/passive
5250-5330/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/passive
5650-6425/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(30dBm)/outdoor
5190-5310/a-turbo(20dBm)
5180-5300/a-turbo(20dBm)
16

Thanks for the feedback. At least for me, for routers without the flash directory, everything is working just fine since 6.46. I don’t have access to a lot of different models, but for me, without flash, 6.46 was fine. Waiting for 6.46.2 for fixing this on flash/-capable routers.

17

I get this error quiet often but only on CHR. A simple reboot solves the problem. It seems to me that the filesystem at some point switches to read-only mode.
I’ll do more tests next time I get this error. (I’ve already updated this instance to 6.46.1)

18

After updating CRS328-24P-4S to 6.46 Version My switch’s fan starts working nonstop without a reason It even reached 2000 RPM and 6.46.1 800 RPM, In the last version most of the time it was not on and whenever it was turning the speed was below 600 RPM.
The loud noise is hurting me so much that I downgraded it to 6.45.7.

19

It is almost like with 6.46.
I am not sure if it is related only to mmips or not (network has hEX + few mipsbe devices), but after some uptime all traffic slows down to a crawl (to LAN and WAN addresses), ping goes completely erratic and packet loss is significant.

I made update at the evening and when all IP connectivity was absent at the morning, forced reboot and downgrade to 6.45.7 solved all issues.

20

Can those with Wireless issues from 6.46 report if the update to 6.46.1 resolves those issues please! I would like to update my router and capacs!
(NOTE: I didnt see anything specific in the ‘whats new’ list that addressed the above though?)