RouterOS version 6.47.8 has been released in public “stable” channel!
Before an upgrade:
Remember to make backup/export files before an upgrade and save them on another storage device;
Make sure the device will not lose power during upgrade process;
Device has enough free storage space for all RouterOS packages to be downloaded.
What’s new in 6.47.8 (2020-Nov-25 10:10):
Changes in this release:
*) arm - improved system stability;
*) bgp - treat route target with AS 65535 as two byte AS;
*) branding - fixed imported skin presence;
*) bridge - fixed BPDU guard port disable/enable on HW offloaded interfaces;
*) disk - improved disk management service stability when receiving bogus packets;
*) dns - improved stability with large table of static records;
*) ike1 - allow using “my-id” parameter with XAuth;
*) leds - fixed LED type setting;
*) metarouter - fixed directory entry reporting;
*) profile - fixed process classification on x86 systems (introduced in v6.47);
*) quickset - fixed wireless client “uptime” counter in “Home Mesh” mode;
*) sstp - fixed “idle-timeout” on TILE and CHR devices;
*) system - replace “3” in superscript to “^3” on RBD53GR devices;
*) upgrade - do not try installing packages if download was not completed;
*) winbox - added “operator” parameter under “Interface/LTE” menu;
*) winbox - added “reformat-hold-button-max” parameter under “System/RouterBOARD/Settings” menu;
*) winbox - added “tls-mode” parameter under “CAPsMAN/Security Cfg.” menu;
*) winbox - added “tx-rx-1024-max” counter under “Interface/Overall-Stats” for CRS3xx devices;
*) winbox - do not allow MAC address changes on LTE interfaces;
*) winbox - show “System/Health” only on boards that have health monitoring;
*) winbox - show “System/RouterBOARD/Mode Button” on devices that have such feature;
*) winbox - show “usb-bus” option on all boards that have it;
*) winbox - show “usb-type” option on all boards that have it;
*) winbox - sort IPv6 firewall “chain” parameter entries alphabetically;
*) wireless - added support for U-NII-2 US and Canada country profiles for mANTBox series devices;
To upgrade, click “Check for updates” at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download
If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device
Please keep this forum topic strictly related to this particular RouterOS release.
On the version 6.47.8 command repartition still not working (e.g. “/partitions repartition partitions =2”) causes the router’s cyclic reboot (about every 10 seconds).
On the version 6.46.8 this command works correctly.
architecture-name: mipsbe; model: 951Ui-2HnD; firmware-type: ar9344; factory-firmware: 6.46.1; current-firmware: 6.47.8; upgrade-firmware: 6.47.8
Support ticket(SUP-32199) was clossed with resolution “Software failure.”
On the version 6.47.8 command “system telnet” does not work with parametr “routing-table”. Error “telnet: Unknown argument”
[admin@MikroTik] > system telnet 192.168.1.1 routing-table=main
telnet: Unknown argument
Welcome back!
On the version 6.45.9 this command works correctly.
[admin@MikroTik] > system telnet 192.168.1.1 routing-table=main
Trying 192.168.1.1…
Connected to 192.168.1.1.
Escape character is ‘^]’.
Look in 6.48beta topic... there is some discussion about that.
Normally the text "improved system stability" means: fixed something that caused a hard crash/hang/reboot.
Similarly the text "improved stability when receiving bogus packets" means: fixed a DoS possibility or even a gaping security hole.
E.g. in this case the "improved stability with large table of static records" refers to a DoS possibility in the DNS resolver that is now fixed (although it still does not work correctly)
I can confirm, my CRS328-24P-4S+RM no longer displays health.
With 6.47.7 I could see temps, fan RPMs, wattages, voltages, amperage, etc.
With this version you click the option and nothing gets displayed / happens..
The update killed the wireless speed on a RB4011+ down to less than 8M. I couldn’t even log in with WinBox/WebFig. Wired, everything was OK. I don’t use the default channel width, so maybe I need to reset everything to default and start over. Since I spent many hours testing various devices to get good wireless speeds on this router, I’ll update a spare HAP ac2 when I have more time to play with this release.
I have been keeping away from recent updates to avoid issues. Back to 6.45.8 for now.
EDIT: As I thought, I solved the issue by resetting to defaults and starting over with all settings instead of just loading a backup.
EDIT: I mean I am retarded then? It should show the section, but should not display temperatures if no sensor. Please be consistent, otherwise you have to hide lots of sections, like wireless if no wifi card present, or LTE if no modem present…
winbox - show “System/Health” only on boards that have health monitoring;
Can you explain this a little bit? Does it include an improvement regarding watchdog for arm ethernet routers? Arm routers (1100xr) frequently switch off and on under high load due to the watchdog.
It should show the section, but should not display temperatures if no sensor. Please be consistent, otherwise you have to hide lots of sections, like wireless if no wifi card present, or LTE if no modem present…