v6 rc5 released

RouterOS General
1

What’s new in 6.0rc5 (2012-Dec-05 15:22):

*) wireless - advanced rate selection is the only method supported;
*) ssh client - support keyboard-interactive authentication;
*) fix simple queue config upgrade;

http://www.mikrotik.com/download

2

RB111, RB112, RB113C, RBMinirouter devices are not supported in v6, please use v5
Never in the future?

3

too many features, too little RAM. those devices are quite old already, and new device of superior power costs as little as 39$

4

And too slow CPU.

5

Normis,
Stable still downloads the 6.04 torrent…

6

And as always:
All stable files - http://www.mikrotik.com/download/routeros-ALL-6.0rc4.torrent

7

On 6.0rc5 I am not able to add PPPoE client interfaces. I tested it only on an RB951-2n. If needed I will send a supout.rif.

8

what is the error message? does the same command work on previous versions?

9

It’s a standard configuration I apply to all the routers used as a CPE (around 1200 installations). It works with all previous releases.

Through CLI, if I add the interface, it just hangs. Through WinBOX it appears an error after a while, saying that it was not possible to add the PPPoE client interface.

It happens even just adding a PPPoE-Client, selecting any interface (example: ethernet 1) without any particular other setting.

10

looks like only hangs if you specify a password. can be added without a password. thanks for the report, will fix!

11

again 6.0rc5
wireless package is not compatible RB433UAH + R52H, CM10

enable wireless packages > enable card R52H and CM10 (default config,reset) router KO! wireless packages CPU 97% KO RouterOS 6.0rc5
off -//- wireless packages router OK

5.21;5.22 error

downgrade 5.20

12

what is “KO”? how dead is it? Anything on serial console? Any autosupout.rif files? Those are standard cards, they work for other people. I doubt you would be the only one to notice.

13

CPU 100% useless, inefficient, broken RouterOS … kernel KO?

14

please answer my other questions

15

via winbox to get to settings, many settings disappeared (google translator)

16

show image
(vlož sem obrázek co ukazuje winbox po nahrání 6.0rc5) Jinak to asi nepochopí

17

When you turn on wireless card > image
RB433UAH_chyba_6.0rc5.jpg

18

no to je hrozný, když tu chtějí psát anglicky a nespokojí se s překladačem od Google

Tak mu kdyžtak napiš, že s vypnutým balíčkem wireless všechno funguje (kromě toho bezdrátu samozřejmě), a když se zapne, tak všechny karty jsou v default nastavení (a vypnutý) a po zapnutí kterýkoliv okamžitě je vidět na CPU zatížení wireless balíčku a celý routerboard je nepoužitelný. Ještě, že přes winbox jdou vypínat balíčky. …dík

19
  1. why do you have wireless package scheduled for disable?
  2. why do you have some filters applied in wireless menu of winbox?
20
  1. enable R52H error > off-on wireless packeges (off R52H card) > test card CM10 (R52H off)
  2. no filters enable (It showed the winbox)