v7.10, 7.10.1 and more [stable] are released!

[Rox169]

Fix for WiFi will be in 7.11 so stay at 7.8

Fix for what issue?

can you read? read above in this topic…

[pe1chl]

The thing is that for me that OID doesn’t give any output at all

snmpwalk -v 1 -c <community> <router_ip> 1.3.6.1.2.1.15

Works fine here!

[doctorrock]

*) sfp - fixed “rate” monitor value for SFP interface on L009UiGS series devices;
*) sfp - fixed combo-ether link monitor for CRS328-4C-20S-4S+ switch;
*) sfp - fixed combo-sfp linking at 1G rate for CRS312 switch;
*) sfp - improved 10G interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 based switches;
*) sfp - improved module compatibility with bad EEPROM data for RB4011, RB5009, CCR2xxx, CRS312 and CRS518 devices;
*) sfp - improved Q/SFP interface stability for 98DX8208, 98DX8212, 98DX8332, 98DX3257, 98DX4310, 98DX8525, 98DX3255, 98PX1012 switches;
*) sfp - improved SFP interface handling for RB4011, RB5009, CCR2xxx and CRS518 devices;
*) sfp - improved system stability with certain SFP modules for CCR2216 and CRS518 devices;
*) sfp - report EEPROM data even if “auto-init-failed” has occurred;

Hello! Please, beware that some of these improvements make Chinese SFP modules (e.g. ONTi Gigabit RJ45 SFP module from Aliexpress) report temperature of 255 degrees which triggers SFP module disabling (for 10 minutes, but it repeats) since the default SFP shutdown temperature is 95 degrees. Thus, you may have problems connecting to your devices after this update if you use such modules.

I got problems with DACs (Direct Attach cables) since the update.
They don’t work anymore, both with auto-negociation and manual transfer rate setting.
One is Ipolex and other is HiFiber. Both don’t work anymore. Very annoying …

[teleport]

RouterOS version 7.10 has been released in the “v7 stable” channel!
Before an upgrade:

1. Remember to make backup/export files before an upgrade and save them on another storage device;
2. Make sure the device will not lose power during upgrade process;
3. Device has enough free storage space for all RouterOS packages to be downloaded.

What’s new in 7.10 (2023-Jun-15 08:17):

*) ssh - fixed RouterOS SSH client login when using a key (introduced in v7.9);

can confirm above is fixed. if you still have issues do these steps:

remove private (on RouterOS) and public (on the remote host) keys;
downgrade RouterOS to version 7.8;
Export RouterOS SSH keys;
import new private key in RouterOS, the public key in the remote host;
check if ssh-exec to the remote host works;
upgrade RouterOS to version 7.10 and check if ssh-exec to the remote host works.

[krafg]

Upgraded all my devices from ROS6. My first time with ROS7. For now all is working flawlessly.

LtAP, PowerBox Pro, BaseBox 2 and BaseBox 5.

Regards.

[DudeBeFishing]

I’m using a CCR-2004-16G-2S+ and a wAP AC (RBwAPG-5HacD2HnD).

I upgraded the CCR-2004-16G-2S+ to 7.10. I tried upgrading the wAP AC through CAPsMAN and noticed the Upgrade button is not working. I click Upgrade and nothing happens.I waited about 10 minutes. It usually confirms if I want to upgrade, then the wAP comes back up in 30s or so. I tried Winbox and the web interface.

EDIT: I think I’m blocking the wAP’s access to WAN. I uploaded RouterOS 7.10 to the CCR-2004 and now the upgrade button works.

[infabo]

Sir, there is a funcionality for this already.

[dooh]

RouterOS version 7.10 has been released in the “v7 stable” channel!
Before an upgrade:

1. Remember to make backup/export files before an upgrade and save them on another storage device;
2. Make sure the device will not lose power during upgrade process;
3. Device has enough free storage space for all RouterOS packages to be downloaded.

What’s new in 7.10 (2023-Jun-15 08:17):
!) ipv6 - fixed DNS server processing by IPv6/ND services (CVE-2023-32154);
!) route - added BFD;
*) bgp - allow to filter BGP sessions by AFI;
*) bgp - changed default VPNv4 import distance to iBGP value (200);
*) bgp - do not check route distinguisher on import;
*) bgp - fixed “as-override” and rename to “output.as-override”;
*) bgp - fixed “remove-private-as” and rename to “output.remove-private.as”;
*) bgp - show address family in advertisements;
*) bgp - show approximate received prefix count by the session;

Thank you for the new features, I can confirm that prefix count seems to work fine, but what does “bgp - show address family in advertisements” mean?

/routing/bgp/advertisements/print is still empty, all session have “.keep-sent-attributes=yes”

[admin@CCR1] > /routing/bgp/advertisements/print detail

[admin@CCR1] > /routing/bgp/advertisements/print count-only
0

[Amm0]

!) route - added BFD;

In docs it says: “Features not yet supported […] enabling BFD for ip route gateways”

Is that a forever thing, or “coming soon”?

[felixka]

Hello! Please, beware that some of these improvements make Chinese SFP modules (e.g. ONTi Gigabit RJ45 SFP module from Aliexpress) report temperature of 255 degrees which triggers SFP module disabling (for 10 minutes, but it repeats) since the default SFP shutdown temperature is 95 degrees. Thus, you may have problems connecting to your devices after this update if you use such modules.

I got problems with DACs (Direct Attach cables) since the update.
They don’t work anymore, both with auto-negociation and manual transfer rate setting.
One is Ipolex and other is HiFiber. Both don’t work anymore. Very annoying …

Yes, this has been an issue for me on CCR2004-16G-2S+ since a few releases ago (I think it started with 7.8). Luckily that device has a backup GbE into the network. But for a few releases the DAC has not been working for me anymore. I see RX traffic on it but nothing on the TX side.

[nichky]

we got issues with RR, is not exchanging the routes on the main table between iBGP

[pitron]

RB4011 after update lost ovpn.
Connecting
Established
Disconndcted

detect UNKNOWN
I am not sure how was before
Any ideas?

In rb4011 i have a poll error.

Everything worked ok in previous version.
I get data in firewall > filter > input
but not in NAT record.
Usr/psw its ok but i get poll error.

What is this error?
I cant find anything for this.

Its the same issue from 7.10rc1:
http://forum.mikrotik.com/t/v7-10rc-is-released/166964/74

Ovpn client log show more info.
I have similar ovpn setup and I am back to 7.9.2 working fine again.

[disappointed]

IPsec not working after update. Freezes on first packet phase1 and can not auth on Strongswan server.
I spent an hour trying to find the cause and couldn’t. I had to go back to the previous ROS.
The same config on 7.9.2 is working.

[Hominidae]

thanks, updated my small zoo:

• RB4011 (SFP+: MT S+AO)
• hex Gr2 (Switch mode)
• CRS309 (SFP+: DACs from Aristo, Cisco, MT S+AO, fs.com 80m 10G-T)
• CRS326-24G-2S (SFP+: DACs from Aristo), running wifi capsman
• LHGG
• wAP-ac 2ndGen (CAP)
• 2x hap-ac^3 (WW2 APs) no ww2-capsman, container (Adguard-home)
• CHR

…VLANs, Wireguard, SFP+ Modules all good.
Container on hap-ac^3 needed re-install to start properly.

[Caci99]

What fix are you referring to? This release has several fixes on wifi wave2.

Clients can not connect WiFi only reboot will help. Check forum there is plenty of reports.

That is a very general statement you are stating. There are plenty of reports but not all can be attributed to ROS, many can be misconfiguration. When you say fix will come at 7.11, it is understood that some particular fix will come at 7.11.
In the change log of 7.10 there are some wifi wave2 fixes like

*) wifiwave2 - fixed key handshake timeout with re-associating clients;

and many others

[Jaggl]

Since this Update my OpenVPN Windows Clients are unable to connect. Mikrotik to Mikrotik with OpenVPN is working. Anyone else see this Problem?

[kcarhc]

please check SUP-119380
RouterOS 7.10 dns dynamic-servers random lost on all type device, RB5009/RB4011/RB450Gx4/CHR
Downgrading to version 7.9.2 everything is fine, but when upgrading to 7.10, random loss occurs.


this link
http://forum.mikrotik.com/t/7-10-stable-dns-crash/167135/1
maybe the same issue

[fakeusername2022]

My OpenVPN Server stopped working after this update!
I get this error on client side:

"Client exception in transport_recv: process_server_push_error: Problem accepting server-pushed peer-id: parse/range issue"

After downgrading to 7.9 the problem solved!

[fakeusername2022]

OVPN log:
⏎[Jun 15, 2023, 17:32:18] Client exception in transport_recv: process_server_push_error: Problem accepting server-pushed peer-id: parse/range issue

works well til 7.10

Same problem here…

[pe1chl]

I don’t use MikroTik OVPN but when I read the above error message I would guess maybe the peer-id used by MikroTik is the “/system identity” that you have set, and you may be able to solve that issue by using a more plain identity than you have now? (try only letters and numbers, for example).