RouterOS version 7.17 have been released in the “v7 stable” channel! Before an upgrade: Remember to make backup/export files before an upgrade and save them on another storage device; Make sure the device will not lose power during upgrade process; Device has enough free storage space for all Rou…

Unable to update RB450GX4. After rebooting the ROS version remains 16.2

Unable to update RB450GX4. After rebooting the ROS version remains 16.2 What say LOG?

Smol homenet updated: [Zwischenablage_01-17-2025_02.jpg] Works good so far :slight_smile: QUESTIONS: *) firewall - added support for random external port allocation; What means this? A bugfix or something we can configure? What is “random” now and what works now what has not worked before? *) …

Not being erlinden but first thing which comes to mind: powerline. E,g,: https://www.devolo.global/products You don’t have to use the wifi variant, you can use the ethernet-only version and use your own AP of choice. “sender” and “receiver” need to be on the same phase of your electrical insta…

Hi After upgrading, l2tp client is not connecting. In Webfig all ipsec tabs are empty and an /ip/ipsec/export results on an error. 2025-01-17 11:14:14 by RouterOS 7.17 software id = WZEK-CJNA model = CCR2004-16G-2S+ serial number = XXXXXXXXX #error exporting "/ip/ipsec/policy/group" (timeout) #…

Smol homenet updated: Zwischenablage_01-17-2025_02.jpg Works good so far :slight_smile: QUESTIONS: *) firewall - added support for random external port allocation; What means this? A bugfix or something we can configure? What is “random” now and what works now what has not worked before? …

Hi After upgrading, l2tp client is not connecting. In Webfig all ipsec tabs are empty and an /ip/ipsec/export results on an error. 2025-01-17 11:14:14 by RouterOS 7.17 software id = WZEK-CJNA model = CCR2004-16G-2S+ serial number = XXXXXXXXX #error exporting “/ip/ipsec/policy/group” (timeout) …

Due to a chip issue which reports board temperature MikroTik decided to remove this parameter from health. Sad - it gave me good, plausible and reliable reading. Opened a ticket (SUP-176683), because I can not relate.

Ok, I have serious problem with DHCP client after upgrade to 7.17, as it drops default route on multiple type of devices (RB4011, SXTsq 5 ac). I experienced this on RCs and betas too. Routers creating autosupout.rif file after dropping def route. I try to figure out what triggers this issue. Edit: …

“Wireless” is fine with 7.17, but “wifi-qcom-ac” is crap, unfortunately. I have had long time open memory leak ticket SUP-147911 for hAP ac^2. This ticket has been closed without solution - but it is bullet proof the leak is related to “wifi-qcom-ac”, because “wireless” is fine and stable. There i…

V7.17.2 [stable] is released!

Announcements

sch January 17, 2025, 10:26am 86

Due to a chip issue which reports board temperature MikroTik decided to remove this parameter from health.

V7.19.1 bugged my RB5009UPr+S+