V7.19.3 [stable] is released!

[holvoetn]

@pe1chl

@bbs2web

hAP ax lite

hAP ax lite has no “IPsec” section under “test results” on the information page.
That means it is not recommended for IPsec usage.
hAP ax2 is the next model up and it has IPsec in its test results.

I do recall however having tested it not that long ago ? Or was it L009 ? Don’t know anymore … it is not on IPSEC Help pages so probably the latter.
Anyhow, test results are not always updated after a feature has been added.

Found it: supported since 7.10b5 and I did test it against RB5009.

hAP ax lite

FINALLY was able to do some testing. Basic IPSEC connection from AX Lite to RB5009 (AX Lite → ISP Router acting as local switch → RB5009 so all Gigabit connections). Both devices on 7.11b6 Used iperf from PC connected to AX lite to iperf container on RB5009. Max I saw was 58 to 65 Mbps (did several tests). CPU on AX Lite went to 76% (1 core to 85% so not yet maxing out). RB5009 never went over 17%. Better then zerotier (because of HW offloading ?) but way below wireguard. Still a huge dif…

So not even Help pages are updated.