v7.19beta [testing] is released!

[oreggin]

I try to use dot1X on a CRS328-24P with external RADIUS server. Switch bridging its all ports and reaching RADIUS sever over a bond interface. However dot1X doesn’t work if HW offload enabled, RADIUS server replies doesn’t reaching the switch CPU. If I disable HW offload under /interface/bridge/port dot1X getting works but switch can forwards only ~500Mbps in this mode. I de-configured bond and using simple interface as a workaround to use HW forwarding.
This is known?

I’m not sure if this will work, but you could try to declare a switch rule with the action “Redirect to CPU” for the RADIUS Server (I guess port 1812).

Might be worth filing a support request anyway.

Thanks for answer, I tried switch rule but my colleagues cross-configured, so I build a lab for this and test further.