v7.3 and v7.3.1 [stable] is released!

[RafZielak]

What with the APR-Ping? When ARP-Ping will be working in ROSv7?

[sergejs]

Hello,

After the update of multiple RB3011UiAS-RM devices from v7.2.3 (with Routerboard firmware as well on v7.2.3) to v7.3, the devices went into boot loop and we are unable to get them into Etherboot or Bootloader mode either. My colleague is taking them to Mikrotik office as of this moment (in Riga) for a potential solution. Otherwise we will get 2 new routers and will configure them with configuration backups since the locations need to have access.

On the other side, multiple RB3011UiAS-RM devices have been upgraded from 7.2.3 to 7.3 successfully as well. We suspect that the devices that went into boot loop had some kind of configuration detail that might not be fully compatible with v7.3. Unfortunately not able to diagnose what detail that could be.

For your information.

Andaç

Could you share configuration (support/export etc.) with MikroTik support (support@mikrotik.com)?

[Hominidae]

I’ve updated both my RB4011 and hap ac3(ww2). all seems fine except the hAPac3 is showing some strange lines each time that it boots:

[me@AC3] > log/print 
 14:11:08 system,info router rebooted
 14:11:08 interface,info Home_vlan link up
 14:11:14 bridge,info "bridge" mac address changed to XX:XX:XX:XX:XX:XX
 14:11:14 system,error,critical error while running customized default configuration script: no such item
 14:11:14 system,error,critical 
...

This did not happen on 7.2.3

…but had been there in 7.2.1

[IntLDaniel]

ah my routing problem is come back, in ROS 7.2.1 i have mangle rule for routing all ip address outside nice address to wireguard, and some ip on routing rules, for conflicting routing bypass using routing rule solve my problem, and in ROS 7.3 it seem routing ignoring the routing rules ip, it routing mangle route first rather than routing rule ip, i am scratch my head now, is there anyone have tips for this kind problem

The same here, have to stay on 7.2.1 (7.2.3 or 7.3 - the same issue). Not only this, currently when upgraded from 7.2.1 to 7.3 I lost again some parts of configuration (at least all simple queues now), but even though I fix that by restoring saved configuration from 7.2.1, the routing issue still persist. Downgrade to 7.2.1 solve everything again. I have a support ticket SUP-81294 on this since 4.5.2022 but still no relevant solution/help from Mikrotik support

[Maggiore81]

Upgraded RB3011 from 7.2.3 to 7.3
reboot loop and router unusable

after 50 loops, it booted, the part of the bgp peers is removed… it didnt like keepalive and hold timers.

[sergejs]

Upgraded RB3011 with 7.2.3 to 7.3
reboot loop

What is the config of your router?
What version was installed prior upgrade?

[Maggiore81]

Upgraded RB3011 with 7.2.3 to 7.3
reboot loop

What is the config of your router?
What version was installed prior upgrade?

it was 7.2.3 , now 7.3
I managed to downgrade, and everything works

[infabo]

[quote=TimmZahn post_id=937874 time=1654612859 user_id=200086]
RB5009UG is still reporting the error “cpu not running at default frequency” after upgrading to v7.3.
[/quote]

So it will until you change it to “auto”.

[JanezFord]

Upgraded CCR1009-8G-1S-1S+PC without problems. Running nat, few vlans, ipsec, ipip/gre tunnels, ospf, wireguard. So far everything works fine. Also successfully upgraded RB2011-UiAS-2HnD.

JF.

[codework]

Wireless management protection has stopped working

[jookraw]

I’ve updated both my RB4011 and hap ac3(ww2). all seems fine except the hAPac3 is showing some strange lines each time that it
…
This did not happen on 7.2.3

Have you tried to upgrade firmware?

Anyone with this issue?

Yes, I always do after the update

[diamuxin]

Update successfull on
RB4011, hAP ac3, hAP ac2 (x2) and mAP 2nD, from 7.2.1 to 7.3.
no problems.

BR.

[pe1chl]

What is the config of your router?
What version was installed prior upgrade?

it was 7.2.3 , now 7.3
I managed to downgrade, and everything works

On such a device (with enough flash), always partition the router with 2 partitions and copy the active to inactive partition before upgrading.
Then, when it bootloops at least you have easy (automatic) recovery.

[WeWiNet]

I do not think this has been 100% fixed, I still have VLAN tagging issues and wireless clients get no IP connection
on a setup that works on 7.2!

I did have VLAN tagging issues when running wifiwave2 on audience in version 7.2.1 and earlier (the config had to be inverse of how it works usually). It was fixed (for my use case at least) in 7.2.3. So I wonder if this indicates yet another fix (versus 7.2.3) or only fix versus 7.2.1 … mind that 7.2.3 was released after 7.3beta started to roll out so the list of changes may actually show differences from early 7.2 version (when code base forked).

Can you give more information how VLAN tagging works on 7.3 (versus 7.2/7.1/7.0)? I migrated from ROS6 to 7.0 and since ever all my VLAN worked…
Also did not see any doc saying VLAN config method changed suddenly.

[twingman]

*) ovpn - fixed hardware offloading support on CHR;

What are conditions to use this feature? I have AES passed to CHR and no HW flag in OVPN server clients. Is there any documentation to this?

Thank you

[mafiosa]

*) ovpn - fixed hardware offloading support on CHR;

What are conditions to use this feature? I have AES passed to CHR and no HW flag in OVPN server clients. Is there any documentation to this?

Thank you

Set your chr vm cpu setting to host

[twingman]

What are conditions to use this feature? I have AES passed to CHR and no HW flag in OVPN server clients. Is there any documentation to this?

Thank you

Set your chr vm cpu setting to host

I have set it, as I write. CHR sees Intel CPU (same as host).

[jjmuriel]

Hello,

After the update of multiple RB3011UiAS-RM devices from v7.2.3 (with Routerboard firmware as well on v7.2.3) to v7.3, the devices went into boot loop and we are unable to get them into Etherboot or Bootloader mode either. My colleague is taking them to Mikrotik office as of this moment (in Riga) for a potential solution. Otherwise we will get 2 new routers and will configure them with configuration backups since the locations need to have access.

On the other side, multiple RB3011UiAS-RM devices have been upgraded from 7.2.3 to 7.3 successfully as well. We suspect that the devices that went into boot loop had some kind of configuration detail that might not be fully compatible with v7.3. Unfortunately not able to diagnose what detail that could be.

For your information.

Andaç

Same here with RB3011 after upgrade to v7.3. I noticed if I disable PPPoE client (to connect to Internet) the router stops rebooting.
Log:

jun/07/2022 15:29:54 system,error,critical kernel failure in previous boot

[russelld]

Upgraded multiple devices inc CCR1009 / CRS317 / RB4011 / RB3011 / wAP AC all OK.

However, I encountered an issue when upgrading my RB5009 from 7.2.3 to 7.3: it has a bonded WAN interface (Ether 2 and 3) connected to a Virgin Media HUB 4 (in modem mode). The bonded WAN interface is configured as a DHCP client and normally gets a 192.168.100.x IP address from the hub with a number of short DHCP lease times, which eventually gets replaced with the public IPv4 address once the cable modem is fully initialised.

However, after upgrading to ROS 7.3 (& firmware 7.3), it gets the initial 192.168.100.x IP addresses via short DHCP leases from the HUB4, but never obtains the final public IPv4 address, even when clicking on the RENEW button in the DHCP client config window.

Support ticket has been raised with Mikrotik.

[jerogabe]

One day this will be fixed…