RouterOS version 7.6 is released in the “v7 stable” channel! Before an upgrade: Remember to make backup/export files before an upgrade and save them on another storage device; Make sure the device will not lose power during the upgrade process; Device has enough free storage space for all RouterO…

MT any statement? Is it safe to upgrade from 7.5 to 7.6? Are you working on fix? I see you have already upgraded. But a simple answer on this is: Wait some weeks and see what other writes in this thread. Never ever upgrade a production router first day of a new release.

where can I find macsec settings in winbox?

Upgrade went well on my RB5009 from 7.6rc3 to 7.6. But there is a problem with partitions, I can not copy part1 to part0 anymore. Copying goes to > 750% and than copying stops with an error [Schermafbeelding 2022-10-18 om 16.57.28.png] [Schermafbeelding 2022-10-18 om 17.14.07.png] Tried do downg…

BGP Sessions stopped for no reason (wich previously worked OK) BGP Sessions prefix count still at 0 BGP advertisements dump not working (I know you can see them on CLI now, but the button is there and it doesn’t work) Are we still testing a pre-alpha?

where can I find macsec settings in winbox? A “tab” under Interfcaes: [Screenshot 2022-10-18 175142.jpg]

@malobert Upgrade went well on my RB5009 from 7.6rc3 to 7.6. But there is a problem with partitions, I can not copy part1 to part0 anymore. Copying goes to 750% and than copying stops with an error [image] v7.6rc is released! Announcements Sounds good… s…

Like 7.6rc2 and 7.6.rc3 this 7.6 release has the same issue for us. CCR2216, 2 bgp links full table, around 1.900.000 prefixes in routing table. issue with cli command : /routing/bgp/advertisements/ when using /routing/bgp/advertisements/print with where command to filter a peer, that working wit…

CCR2116 - Reboot every 2 hours without any reasons I’m using 295 nats rules actually i plan to remove all of them and route directly but for the moment the router keep rebooting anyone with this problem ?

CCR2116 - Reboot every 2 hours without any reasons I’m using 295 nats rules actually i plan to remove all of them and route directly but for the moment the router keep rebooting anyone with this problem ? did you have an autosupout file created at reboot ?

@theosoft @malobert Upgrade went well on my RB5009 from 7.6rc3 to 7.6. But there is a problem with partitions, I can not copy part1 to part0 anymore. Copying goes to 750% and than copying stops with an error v7.6rc is released! - #75 by theosoft It is reproduced and solution in progress.. …

v7.6 [stable] is released!

Announcements

theosoft October 18, 2022, 4:23pm 47

@malobert

It is reproduced and solution in progress..

VETH related bug...