very Low Signal form RB Metal 2SHPn

RouterOS General
1

I am using RB Metal 2SHPn & RB Groove 2Hn for AP. But I am facing big problem from RB Metal 2SHPn. Where RB Groove 2Hn has signal fo 60dbi , In that place RB Metal 2SHPn has 35dbi to 40 dbi & the signal is always very up down. The configuration is same as RB Groove 2Hn. I had upgraded the RouterOS to v6.7 , The result is not good and signal is very Up Down. So please help me.

Mikrotik Metal 2.4 wihtout wireless
2

35dB to 40 dB is more signal than 60 dB

It likes that the signal is to heavy, reduce the signal

The signal can disturb itself

3

This signal in not -35dB . This is Signal to Noise 35.
signal.jpg

4

Have you a line of sight between ap and station?

Which antennas are you using on the groove

5

I am using 2.4 GHz 15 dBi Omnidirectional Antenna on both Grove & Metal 2SHPn

http://www.l-com.com/wireless-antenna-24-ghz-15-dbi-omnidirectional-antenna-n-female-connector
images.jpg