Very low signal

RouterOS Wireless Networking
1

Hello,

I don’t anderstand why I have a very low signal with my cAP ax.
Here is my conf :

# 2023-07-05 15:24:10 by RouterOS 7.10.1
# software id = NVS0-QSJW
#
# model = cAPGi-5HaxD2HaxD
# serial number = <removed>
/interface bridge
add admin-mac=48:A9:8A:C2:8C:95 auto-mac=no comment=defconf name=bridge
/interface wifiwave2
set [ find default-name=wifi1 ] channel.band=5ghz-ac .skip-dfs-channels=10min-cac .width=20/40/80mhz configuration.country=France .hide-ssid=no .mode=ap \
    .ssid=toto2@work disabled=no security.authentication-types=wpa2-psk,wpa3-psk .encryption=""
set [ find default-name=wifi2 ] channel.band=2ghz-ax .skip-dfs-channels=10min-cac .width=20/40mhz configuration.country=France .mode=ap .ssid=toto@work \
    disabled=no security.authentication-types=wpa2-psk,wpa3-psk
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=wifi1
add bridge=bridge comment=defconf interface=wifi2
add bridge=bridge interface=ether1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/ipv6 settings
set disable-ipv6=yes
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip dhcp-client
add interface=bridge
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip service
set telnet disabled=yes
set ftp disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/system note
set show-at-login=no
/system routerboard mode-button
set enabled=yes on-event=dark-mode
/system script
add comment=defconf dont-require-permissions=no name=dark-mode owner=*sys policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="\r\
    \n   :if ([system leds settings get all-leds-off] = \"never\") do={\r\
    \n     /system leds settings set all-leds-off=immediate \r\
    \n   } else={\r\
    \n     /system leds settings set all-leds-off=never \r\
    \n   }\r\
    \n "
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN

Edit mod: removed serial, applied code quotes

2

what power frequency are we taking about. 5745 for example for france is 25mw 8/9db
For my cAP ax in the UK I have, bearing in mind +6db antenna gain for 5G I think.
state: running
channel: 5180/ax/Ceee
registered-peers: 2
authorized-peers: 2
tx-power: 16
16+6=22 which is correct for that frequency for the UK/Europe



interface/wifiwave2/monitor 0
interface/wifiwave2/monitor 1
3

Hi and many thanks for your answer.

Here the answer to your code :

interface/wifiwave2/monitor 0
state: running
channel: 5745/ac/Ceee
registered-peers: 1
authorized-peers: 1
tx-power: 8
available-channels: 5180/ac/Ceee,5200/ac/eCee,5220/ac/eeCe,5240/ac/eeeC,5260/ac/Ceee,5280/ac/eCee,5300/ac/eeCe,5320/ac/eeeC,5500/ac/Ceee,5520/ac/eCee,5540/ac/eeCe,5560/ac/eeeC,5660/ac/Ceee,5680/ac/eCee,5700/ac/eeCe,5720/ac/eeeC,5745/ac/Ceee,5765/ac/eCee,5785/ac/eeCe,5805/ac/eeeC

interface/wifiwave2/monitor 1
state: running
channel: 2427/ax/Ce
registered-peers: 0
authorized-peers: 0
tx-power: 14
available-channels: 2412/ax/Ce,2417/ax/Ce,2422/ax/Ce,2427/ax/Ce,2432/ax/Ce,2432/ax/eC,2437/ax/Ce,2437/ax/eC,2442/ax/Ce,2442/ax/eC,2447/ax/Ce,2447/ax/eC,2452/ax/Ce,2452/ax/eC,2457/ax/eC,2462/ax/eC,2467/ax/eC,2472/ax/eC

4

Dear bDuhaze, After Cap Ac i just buy a CAP Ax for better signal and better stability but Neither the signal is strong nor the performance as I hoped. I think I have a configuration error too. what is your latest status? Can you update the thread please?