VLAN Access port issue

RouterOS Beginner Basics
1

Hi,
I have an RB4011 with a several VLAN’s configured.
The router is connected to a TP-Link managed switch with a bond. On the TP-Link I have all my access ports.

Now I want to add an access port to the RB4011 itself but can’t seem to get it working.

-All VLAN’s are added to the bridge
-Bonding interface is added as a bridge port
-Bridge> VLAN’s > In every VLAN the bonding interface is added as tagged

I though I could just add a new interface to the bridge, set the PVID and mark it as untagged in bridge>VLAN’s but that doesn’t seem to work.
VLAN Filtering on the bridge is disabled and when I enable it I lose all connection and have to restore to a previous config.

Any tips?
(I’m running routerOS 6.47.9)

2

yes post your config
/export hide-sensitive file=anynameyouwish

3

VLAN Filtering on the bridge is disabled and when I enable it I lose all connection and have to restore to a previous config.

Wrong configuration…
Post your configuration as @anav suggested.
Next time let a port out of the Bridge or use console port for management.