Greetings all, I am trying to get a 2 WAN, 2 VLAN and 1 unrestricted LAN subnet configured. I have tried and tried to setup 2 VLAN’s (bridging 2 MT’s from example page worked great many times) 1 for public and 1 for admin. I have followed the links below (any many more) many times over and can get VLAN’s configured and IP’s however I cannot ever get them to pass any traffic. Below is a chart and some links. The load balancing I have not tackled yet anything to contribute would be appreciated, thx.
Need a similar setup (no WAP) → http://home.swkls.org/mikrotik-vlan-trunk-and-unifi-ap/
Works great MT to MT however I need 2 different ports on same switch → http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment
Not sure what to say, never worked → http://sygard.no/2011/09/vlan-access-ports-on-mikrotik-routers/
Never worked (no pass traffic) → http://mikrotikbasic.blogspot.ca/2008/02/vlan-setup.html
This would be perfect with VLAN’s per port (works great otherwise) → http://networkingforintegrators.com/2013/01/how-to-run-multiple-networks-from-a-mikrotik/
This seems my best bet, can’t seem to get through it though → http://forum.mikrotik.com/viewtopic.php?f=2&t=37508&start=0
Ideally I want this (I have access to RB75GL and 1100Hx2)
Ether1 @ WAN 1
Ether2 @ WAN 2
Ether3 @
Ether4 @ VLAN_PUB - 192.168.50.1/24 - DHCP@192.168.50.101-199
Ether5 @ VLAN_ADM - 192.168.10.1/24 - DHCP@192.168.10.101-199